The Dener TTH-10(C) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTH-10(C) CNC lathe: 438 mm turning diameter, 607 mm machining length, 10 inch chuck, 3,500 rpm, 92 mm bore, 75 mm bar capacity.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~10 m/min |
| Swing Diameter | 650 mm (25.6 in) |
| Max Turning Diameter | 438 mm (17.2 in) |
| Max Turning Length | 607 mm (23.9 in) |
| Chuck Size | 10 inch (254 mm) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Motor Power | 11/16.5 kW |
| Spindle Bore | 92 mm (3.6 in) |
| Bar Capacity | 75 mm (3 in) |
The price estimate for the Dener TTH-10(C) is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-tth-10-c#price; the request is passed to Dener or an authorised dealer.
Maximum turning diameter is 438 mm (17.2 in) and machining length 607 mm (23.9 in), under a swing diameter of 650 mm (25.6 in). The TTH-10 lists 528 mm (20.8 in) and 660 mm (26 in).
No. The TTH-10(C) keeps the 92 mm (3.6 in) spindle bore and the 75 mm (3 in) bar capacity. Chuck diameter, spindle speed and motor power are also unchanged.
The product page gives no definition. It should be clarified with the supplier, together with the reason the turning diameter and machining length are lower than in the base column.
The standard equipment list names FANUC 0İ TFP for the series, and the optional list names Mitsubishi M80A-8A. Neither list distinguishes the TTH-10(C) from the other models.
