The Dener TTH-12 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,450 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTH-12 CNC lathe: 12 inch chuck, 118 mm spindle bore, 95 mm bar capacity, 2,450 rpm, 488 mm turning diameter, 614 mm machining length.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,450 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~10 m/min |
| Swing Diameter | 650 mm (25.6 in) |
| Max Turning Diameter | 488 mm (19.2 in) |
| Max Turning Length | 614 mm (24.2 in) |
| Chuck Size | 12 inch (305 mm) |
| Max Spindle Speed | 2,450 rpm |
| Spindle Motor Power | 15/20.4 kW |
| Spindle Bore | 118 mm (4.6 in) |
| Bar Capacity | 95 mm (3.7 in) |
The price estimate for the Dener TTH-12 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-tth-12#price; the request is passed to Dener or an authorised dealer.
The spindle bore diameter is 118 mm (4.6 in) and the bar capacity is 95 mm (3.7 in). Both are the largest figures in Dener's TTC and TTH lathe tables.
Swing diameter 650 mm (25.6 in), maximum turning diameter 488 mm (19.2 in) and machining length 614 mm (24.2 in). The TTH-10 on the same swing lists 528 mm (20.8 in) and 660 mm (26 in).
The spindle speed is 2,450 rpm and the spindle motor power is printed as 15/20.4 kW. The table gives no torque figure, and it does not say which rating each power value represents.
For the series Dener lists FANUC 0İ TFP, roller linear guideways, a BMT / slot-type turret, a fully enclosed cabin, a chip conveyor, automatic lubrication and coolant systems and an oil and water separator unit.
