The DMG MORI DMC 160 u FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 160 u FD duoBLOCK: 5-axis mill-turn, 1,600 x 1,600 x 1,100 mm travels, 400 rpm DirectDrive table, parts to 1,600 mm and 4,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,600 mm (63 in) |
| Max Workpiece Height | 1,350 mm (53.1 in) |
| Max Workpiece Weight | 4,000 kg (8,818.5 lb) |
| X-Axis Travel | 1,600 mm (63 in) |
| Y-Axis Travel | 1,600 mm (63 in) |
| Z-Axis Travel | 1,100 mm (43.3 in) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 1,327.6 ft lb (5X torqueMASTER) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 69.7 hp (5X torqueMASTER) |
| Table Speed | Up to 400 rpm (DirectDrive table) |
| Tool Magazine | Wheel magazine with 453 tool pockets; tool replenishment time max. 5.6 sec |
| Pallet Changer | Rotating pallet changer as standard |
Our best estimate for the DMG Mori DMC 160 u FD duoBLOCK is $1,200,000 - $1,800,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmc-160-u-fd-duoblock#price; the request is passed to DMG Mori or an authorised dealer.
Up to 4,000 kg (8,818.5 lb), for a part as large as 1,600 mm (63 in) in diameter and 1,350 mm (53.1 in) tall. The figure includes fixtures and chucks. For turning, a load of that size has to be balanced, and the table speed chosen to suit, within the stated maximum of 400 rpm.
The DMC 210 u FD is the next step up, with 2,100 × 2,100 × 1,250 mm (82.7 × 82.7 × 49.2 in) of travel and a workpiece weight of 6,000 kg (13,227.7 lb). The DMC 160 u FD duoBLOCK offers 1,600 × 1,600 × 1,100 mm (63 × 63 × 43.3 in) and 4,000 kg (8,818.5 lb). Maximum workpiece diameter is 2,500 mm (98.4 in) on the DMC 210 u FD against 1,600 mm (63 in).
The DirectDrive table reaches rotational speeds up to 400 rpm, which DMG MORI lists for milling and turning in one setup. No table torque is given in the Highlights, so request the torque and power of the table drive if heavy turning cuts are planned.
Of the two listed, the 5X torqueMASTER has the higher torque at 1,327.6 ft lb with 69.7 hp, which suits large face mills and drills run slowly. The powerMASTER motorspindle has 737.6 ft lb and 103.3 hp, 48% more power, and suits higher cutting speeds. Neither is listed with a maximum speed.
DMG MORI quotes the wheel magazine with 453 tool pockets and a tool replenishment time of max. 5.6 sec, and describes it as compact. The Highlights do not state the size of the base magazine, so confirm what is included.
