The DMG MORI DMC 200 H FD monoBLOCK is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the CELOS with Siemens 840D solutionline / HEIDENHAIN TNC7. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMC 200 H FD monoBLOCK: listed 2,000 x 2,000 x 1,500 mm travels, 1,600 x 1,250 mm pallet for 5,000 kg, 52 kW HSK-A100 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | CELOS with Siemens 840D solutionline / HEIDENHAIN TNC7 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 52.0 kW |
| Spindle Taper Interface | HSK-A100 |
| Automatic Tool Changer (ATC) | 63 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 2,000 mm (78.7 in) |
| Y-Axis Travel | 2,000 mm (78.7 in) |
| Z-Axis Travel | 1,500 mm (59.1 in) |
| Pallet Size | 1,600 x 1,250 mm (63 x 49.2 in) |
| Max Pallet Load | 5,000 kg (11,023 lb) |
| B Axis Swivel | -45 to +180 degrees (225 total), direct-drive |
| Max Spindle Speed | 10,000 RPM |
| Spindle Taper | HSK-A100 |
| Spindle Motor Power | 52 kW / 70 hp |
| Spindle Torque | 520 Nm / 383 ft-lb |
| Rapid Traverse | 60 m/min (2,362 ipm) |
| Tool Capacity | 63 tools standard (up to 303) |
| Tool Change Time | 5.5 seconds chip-to-chip |
| Pallet Change Time | 75 seconds |
| Bed Construction | Mineral-cast monoBLOCK single-piece bed |
| CNC Control | CELOS with Siemens 840D solutionline / HEIDENHAIN TNC7 |
Our best estimate for the DMG Mori DMC 200 H FD monoBLOCK is $1,600,000 - $2,500,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmc-200h-fd#price; the request is passed to DMG Mori or an authorised dealer.
The listed pallet measures 1,600 x 1,250 mm (63 x 49.2 in) and is rated at 5,000 kg (11,023 lb). Listed travels are 2,000 mm (78.7 in) in X, 2,000 mm (78.7 in) in Y and 1,500 mm (59.1 in) in Z. The weight has to cover the fixture as well as the part.
It is not in DMG MORI's current lineup and may be an older model, so it is most likely to be met as a used machine. In that case the listed figures should be checked against the machine's own documents, in particular the magazine size, which is listed as 63 tools with up to 303.
The listed tool change is 5.5 seconds chip-to-chip and the listed pallet change is 75 seconds. Rapid traverse is 60 m/min (2,362 ipm). On parts with long machining times the 75 seconds is a small share of the cycle.
A swivel from -45 to +180 degrees, 225 degrees in total, with direct drive. The listed spindle on that axis is HSK-A100 with 10,000 rpm, 52 kW (70 hp) and 520 Nm (383 ft-lb).
