The DMG MORI DMP 70 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMP 70: production VMC with 700 x 420 x 380 mm travels, 10,000 rpm 78 Nm inline spindle, 60 m/min rapids, 2 g acceleration, 4.2 m² footprint.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 840 mm (33.1 in) |
| Max Workpiece Width | 420 mm (16.5 in) |
| Max Workpiece Diameter | 290 mm (11.4 in) |
| Max Workpiece Height | 580 mm (22.8 in) |
| Max Workpiece Weight | 400 kg (881.8 lb) |
| X-Axis Travel | 700 mm (27.6 in) |
| Y-Axis Travel | 420 mm (16.5 in) |
| Z-Axis Travel | 380 mm (15 in) |
| Max Spindle Speed | 10,000 rpm inline spindle; 24,000 rpm inline spindle optional |
| Spindle Torque | Up to 78 Nm (10,000 rpm spindle); up to 48 Nm (optional 24,000 rpm spindle) |
| Rapid Traverse | 60 m/min in all axes |
| Axis Acceleration | Up to 2 g |
| Chip To Chip Time | 1.5 seconds |
| Footprint | 4.2 m² |
Our best estimate for the DMG Mori DMP 70 is $115,000 - $160,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmp-70#price; the request is passed to DMG Mori or an authorised dealer.
DMG MORI states that automation can be integrated from the right side, from the left side and from the front of the machine. As an example of space needed, a DMP 70 with WH 3 Cell takes 8.8 m², while the machine alone has a footprint of 4.2 m².
The inline spindle runs at 10,000 rpm with up to 78 Nm. A 24,000 rpm inline spindle with up to 48 Nm is available as an option. Both use spring preloaded bearings. The Highlights give no power figure.
Chip-to-chip time is 1.5 seconds. The axes accelerate at up to 2 g and rapid traverse is 60 m/min in all axes. On parts with many tools and short cuts, those three figures set most of the cycle time.
Maximum workpiece length is 840 mm (33.1 in), width 420 mm (16.5 in), height 580 mm (22.8 in), diameter 290 mm (11.4 in) and weight 400 kg (881.8 lb). X travel is 700 mm (27.6 in), so the longest workpieces extend past the cutting range.
The DMP 70 is the smaller machine on every axis: 700 mm (27.6 in), 420 mm (16.5 in) and 380 mm (15 in) in X, Y and Z. The CMX 800 has 800 mm (31.5 in), 560 mm (22 in) and 510 mm (20.1 in).
