The DMG MORI DMU 100 p FD duoBLOCK is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 100 p FD duoBLOCK: 1,000 x 1,250 x 1,000 mm travels, parts to 1,100 mm diameter and 2,200 kg, 453 tool pockets, up to 1,328 ft lb.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 103.3 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 453 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 1,100 mm (43.3 in) |
| Max Workpiece Height | 1,600 mm (63 in) |
| Max Workpiece Weight | 2,200 kg (4,850.2 lb) |
| X-Axis Travel | 1,000 mm (39.4 in) |
| Y-Axis Travel | 1,250 mm (49.2 in) |
| Z-Axis Travel | 1,000 mm (39.4 in) |
| Spindle Motor Power | 103.3 hp (powerMASTER motorspindle); 69.7 hp (5X torqueMASTER) |
| Spindle Torque | 737.6 ft lb (powerMASTER motorspindle); 1,328 ft lb (5X torqueMASTER) |
| Tool Capacity | 453 tool pockets (wheel magazine) |
| Tool Replenishment Time | max. 5.6 sec (wheel magazine) |
Our best estimate for the DMG Mori DMU 100 p FD duoBLOCK is $750,000 - $1,200,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmu-100-p-fd-duoblock#price; the request is passed to DMG Mori or an authorised dealer.
The listed data does not quantify it. Travels of 1,000 mm (39.4 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z are identical for the DMU 100 p FD duoBLOCK and the DMU 100 P duoBLOCK, as are the workpiece limits, and the Highlights give no table speed or turning torque. Ask DMG MORI for the turning data of the FD table before comparing the two.
The maximum workpiece height is 1,600 mm (63 in), with a maximum diameter of 1,100 mm (43.3 in) and a maximum weight of 2,200 kg (4,850.2 lb). Z travel is 1,000 mm (39.4 in). A part close to full height therefore needs its fixture height and tool lengths planned so that both its top and its lower features can be reached.
The 5X torqueMASTER, with 1,328 ft lb and 69.7 hp. The powerMASTER motorspindle has 737.6 ft lb and 103.3 hp. That is 80% more torque for the torqueMASTER and about 48% more power for the powerMASTER. No speed is listed for either spindle.
DMG MORI lists a tool replenishment time of max. 5.6 sec for the wheel magazine with 453 tool pockets, and describes the magazine as compact with low space requirements. Maximum tool length, diameter and weight are not in the listed data and should be checked against the tools you plan to run.
Three points are listed under precision: a completely water-cooled feed drive, a spindle growth sensor (SGS) that compensates for spindle growth, and a temperature response DMG MORI calls significantly improved. No positioning accuracy figure is published in the listed data for the DMU 100 p FD duoBLOCK.
