The DMG MORI DMU 270 P FD is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMU 270 P FD: 5-axis mill-turn for parts to 3,400 mm diameter and 12,000 kg. Travels 2,700 x 2,700 x 1,600 mm, up to 243 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 243 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 3,400 mm (133.9 in) |
| Max Workpiece Height | 1,960 mm (77.2 in) |
| Max Workpiece Weight | 12,000 kg (26,455.5 lb) |
| X-Axis Travel | 2,700 mm (106.3 in) |
| Y-Axis Travel | 2,700 mm (106.3 in) |
| Z-Axis Travel | 1,600 mm (63 in) |
| Tool Capacity | up to 243 tools (wheel type magazine) |
| Table Torque | up to 8,113.2 ft lb (DirectDrive table) |
| Spindle Torque | powerMASTER motor spindle up to 737.6 ft lb; torqueMASTER gear spindle 1,327.6 ft lb |
| Feed Rate Max | up to 2,362 ipm |
| Feed Force | up to 10,116 lbf |
| Band Filter Unit | 2,500 l as standard |
Our best estimate for the DMG Mori DMU 270 P FD is $2,000,000 - $3,500,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmu-270-p-fd#price; the request is passed to DMG Mori or an authorised dealer.
DMG MORI lists a maximum workpiece diameter of 3,400 mm (133.9 in), a maximum height of 1,960 mm (77.2 in) and a maximum weight of 12,000 kg (26,455.5 lb). Travels are 2,700 mm (106.3 in) in X and Y and 1,600 mm (63 in) in Z, so both the diameter and the height limits exceed what the linear axes cover on their own.
Turning is done on a DirectDrive table with a torque of up to 8,113.2 ft lb, combined with milling in one setup. The listed data does not state the table's maximum speed, so ask for it if you turn smaller diameters where surface speed depends on rpm.
DMG MORI names a powerMASTER motor spindle with up to 737.6 ft lb and a torqueMASTER gear spindle with 1,327.6 ft lb. The gear spindle delivers 80% more torque, which is what large-diameter cutters in steel need. Speeds and power ratings are not part of the listed data.
It is the middle size. The DMU 210 P FD travels 2,100 × 2,100 × 1,250 mm (82.7 × 82.7 × 49.2 in) and the DMU 340 P FD 3,400 × 3,400 × 2,000 mm (133.9 × 133.9 × 78.7 in). The DMU 270 P FD lies between them at 2,700 × 2,700 × 1,600 mm (106.3 × 106.3 × 63 in), with a 12,000 kg (26,455.5 lb) workpiece limit.
A band filter unit with 2,500 l comes as standard and needs its own floor space. The machine stands on a 3-point support with an inherently stiff bed, and DMG MORI states that no foundation is required. The feed drive is water-cooled and the linear guideways are cooled. Machine weight and connected power are not in the listed data, so request them with the layout drawing.
