The DMG MORI DMV 60 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI DMV 60: fixed-table VMC with 600 x 600 x 510 mm travels, 1,000 kg (2,204.6 lb) workpieces, spindles from 12,000 to 20,000 rpm, linear scales.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 900 mm (35.4 in) |
| Max Workpiece Width | 600 mm (23.6 in) |
| Max Workpiece Height | 550 mm (21.7 in) |
| Max Workpiece Weight | 1,000 kg (2,204.6 lb) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | inlineSPINDLE 12,000 rpm; speedMASTER 15,000 rpm High Torque; speedMASTER 20,000 rpm |
| Rapid Traverse | 42 m/min in all linear axes |
| Spindle Interface | BIG PLUS |
| Circular Interpolation Accuracy | Ball-bar in all planes < 6 µm |
| Linear Scales | Linear scales in all linear axes |
Our best estimate for the DMG Mori DMV 60 is $145,000 - $195,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-dmv-60#price; the request is passed to DMG Mori or an authorised dealer.
With a fixed table the workpiece is not part of the moving mass. DMG MORI states a constant dynamic characteristic regardless of the workpiece weight, and handling of workpieces up to 1,000 kg (2,204.6 lb). It also describes the layout as suited to die and mold applications.
DMG MORI lists a range with the BIG PLUS interface: the inlineSPINDLE at 12,000 rpm, the speedMASTER High Torque at 15,000 rpm and the speedMASTER at 20,000 rpm. The Highlights do not give power or torque for any of them.
Travels are 600 mm (23.6 in) in X, 600 mm (23.6 in) in Y and 510 mm (20.1 in) in Z. The largest workpiece is 900 mm (35.4 in) long, 600 mm (23.6 in) wide and 550 mm (21.7 in) high, at up to 1,000 kg (2,204.6 lb).
DMG MORI states linear scales in all linear axes and an accuracy of circular interpolation, measured by ball-bar in all planes, of under 6 µm. X and Y use direct drive transmission. No positioning or repeatability figure is given in the Highlights.
The travels are nearly the same. The DMV 60 has 600 mm (23.6 in) of X, 600 mm (23.6 in) of Y and 510 mm (20.1 in) of Z. The CMX 600 has 600 mm (23.6 in), 560 mm (22 in) and 510 mm (20.1 in). The DMV 60 has a fixed table and takes workpieces up to 1,000 kg (2,204.6 lb).
