The DMG MORI ecoMill 50 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Siemens Sinumerik 828D / Fanuc 0i-MF. a top spindle speed of 15,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ecoMill 50: vertical machining center listed with 500 × 400 × 400 mm travels, 15,000 rpm CAT 40 spindle, 11 kW and 20 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Siemens Sinumerik 828D / Fanuc 0i-MF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 15,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | CAT 40 |
| Table / Platter / Chuck Size | 600 x 400 mm (23.6 x 15.7 in) |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 4,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 500 mm (19.7 in) |
| Y-Axis Travel | 400 mm (15.7 in) |
| Z-Axis Travel | 400 mm (15.7 in) |
| Max Spindle Speed | 15,000 RPM |
| Spindle Taper | CAT 40 |
| Spindle Motor Power | 11 kW (14.8 hp) |
| Spindle Torque | 70 Nm |
| Table Size | 600 x 400 mm (23.6 x 15.7 in) |
| Table Load Capacity | 400 kg (882 lb) |
| Rapid Traverse | 36 m/min (1,417 ipm) |
| Tool Capacity | 20 (30 optional) |
| Positioning Accuracy | 0.008 mm (8 µm) |
| Machine Weight | 4,500 kg (9,921 lb) |
| CNC Control | Siemens Sinumerik 828D / Fanuc 0i-MF |
Our best estimate for the DMG Mori ecoMill 50 is $80,000 - $120,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ecomill-50#price; the request is passed to DMG Mori or an authorised dealer.
No. The ecoMill 50 is not in DMG MORI's current lineup and may be an older model. Anyone considering one is looking at an existing machine, so the listed figures, such as 500 × 400 × 400 mm of travel and a 15,000 rpm spindle, should be confirmed from that machine's manual and data plate.
Listed travels are 500 mm (19.7 in) in X and 400 mm (15.7 in) in both Y and Z. The table is 600 x 400 mm (23.6 x 15.7 in) with a listed load of 400 kg (882 lb). Because the table is longer than the X travel, a part can be clamped along the full table but only 500 mm of its length is within reach of the spindle.
A CAT 40 spindle with a maximum of 15,000 rpm, 11 kW (14.8 hp) and 70 Nm. The speed suits small tools and aluminium. The 70 Nm torque figure is the one to check against large face mills, drills and taps in steel, where torque runs out before speed does.
The listed magazine holds 20 tools, with 30 as an option. On an existing machine the magazine is already fixed, so count the pockets instead of assuming the larger one. Tool diameter, length and weight limits are not in the listed figures and need to come from the manual.
Two are listed, Siemens Sinumerik 828D and Fanuc 0i-MF. A given machine has one of them. The choice affects post-processors, operator training and how existing programs transfer, so identify the control before comparing two machines of this model.
The NV 4000 DCG has 600 mm (23.6 in) of X travel with 400 mm (15.7 in) of Y and Z. The ecoMill 50 is listed with the same 400 mm of Y and Z and a shorter X of 500 mm (19.7 in).
