The DMG MORI i 100 Speed is an industrial-grade 5-Axis Machining Centers powered by the Siemens SINUMERIK ONE / DMG Mori CELOS. a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI i 100 Speed: 5-axis machining center with 635 / 500 / 450 mm travels, 630 mm rotary table, 20,000 rpm HSK-A63 spindle and 40 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Siemens SINUMERIK ONE / DMG Mori CELOS |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 28.0 kW |
| Spindle Taper Interface | HSK-A63 |
| Approx. Machine Weight | 14,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Z Travel | 635 / 500 / 450 mm |
| Swivel Range B Axis | −30° / +120° |
| Rotary Table Diameter | 630 mm |
| Table Load Capacity | 400 kg |
| Main Spindle Speed | 20,000 rpm |
| Spindle Motor Power | 28 kW |
| Spindle Torque | 130 Nm |
| Spindle Taper | HSK-A63 |
| Rapid Traverse X Y Z | 60 m/min |
| Rapid Traverse A C | 40 / 80 rpm |
| Tool Change Time Chip To Chip | < 3 sec |
| Tool Magazine Capacity | 40 tools (80 optional) |
| CNC Control | Siemens SINUMERIK ONE / DMG Mori CELOS |
| Machine Weight | Approx. 14,000 kg |
Our best estimate for the DMG Mori i 100 Speed is $500,000 – $750,000. This is an estimate for a 5-axis machining centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-i-100-speed#price; the request is passed to DMG Mori or an authorised dealer.
No. It is not in DMG MORI's current lineup and may be an older model. A buyer is therefore looking at an existing machine, and the listed figures on this page, such as 635 / 500 / 450 mm of travel, a 20,000 rpm spindle and 40 tools, should be confirmed from that machine's own documentation before any decision.
The listed travels are 635 mm in X, 500 mm in Y and 450 mm in Z. The rotary table is 630 mm in diameter with a listed table load of 400 kg, and the B-axis swivel range is -30° to +120°. Because X travel and table diameter are nearly equal, large parts leave little side clearance for the tool.
The listed spindle runs to 20,000 rpm with 28 kW and 130 Nm, on an HSK-A63 taper. Those figures point to finishing and high-speed work with smaller tools. For heavy roughing, the 130 Nm torque figure is the one to weigh against your largest cutter.
40 tools in the listed standard magazine, with 80 tools as an option. The tool change is listed at under 3 sec chip to chip. On a machine that is already built, find out which magazine was fitted, since the larger one cannot be assumed.
The machine weight is listed as approx. 14,000 kg, which matters for rigging and for the floor it will stand on. The control is given as Siemens SINUMERIK ONE with DMG MORI CELOS. Confirm both on the machine itself, because the model is no longer shown in the current lineup.
