The DMG MORI LASERTEC 50 PowerDrill is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI LASERTEC 50 PowerDrill: 5-axis laser drilling of cooling air holes, parts up to Ø 13.8 in, 540 x 500 x 700 mm travels, Nd:YAG or fiber laser.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 540 mm (21.3 in) |
| Y-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 700 mm (27.6 in) |
| Max Workpiece Diameter | Ø 13.8 in (part size) |
| Axis Acceleration | > 1 g (linear drives in X / Y) |
| Rotary Axes | B- and C-axis, torque motors |
| Footprint | 43.1 ft² |
The price estimate for the DMG Mori LASERTEC 50 PowerDrill is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-lasertec-50-powerdrill#price; the request is passed to DMG Mori or an authorised dealer.
DMG MORI states a part size of up to Ø 13.8 in. Travels are 540 mm (21.3 in) in X, 500 mm (19.7 in) in Y and 700 mm (27.6 in) in Z, with B and C as the two rotary axes. No workpiece weight limit is given in DMG MORI's data for this model, so check it for heavy fixtures.
Two kinds. DMG MORI lists a high precision Nd:YAG laser of 300 W / 500 W, or a QCW fiber laser that its US page rates at 4 - 30.8 hp. The page describes them as different sources for various applications without saying which fits which job.
DMG MORI states that shaped hole machining on this machine is up to ten times faster than wire EDM, with more freedom in the hole geometry. The laser works without contact, so no electrodes have to be made and there is no tool wear. The speed claim is a maximum, and the result on a given hole shape should be confirmed by trial.
X and Y have linear drives with an acceleration of more than 1 g. Both rotary axes, B and C, are driven by torque motors. Drilling work is mostly short repositioning moves, so these drives count for more than a high rapid rate would.
The machine has a CCD camera and a 3D measuring probe for setup. They let the operator locate the part as it actually sits in the fixture before drilling starts. DMG MORI also describes the working area as clearly structured with good access to the workpiece, on a footprint of 43.1 ft².
