The DMG MORI LASERTEC 50 Shape Femto is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI LASERTEC 50 Shape Femto: 5-axis laser ablation for miniature molds and dies. 540 x 500 x 700 mm travels, ≤ 8 μm positioning accuracy.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 540 mm (21.3 in) |
| Y-Axis Travel | 500 mm (19.7 in) |
| Z-Axis Travel | 700 mm (27.6 in) |
| Positioning Accuracy | ≤ 8 μm |
| Surface Quality | up to Ra < 0.1 µm in carbide tools |
| Axis Acceleration | > 1 g (linear drives) |
| Rotary Axes | B- and C-axis, torque motors |
| Footprint | 4 m² |
The price estimate for the DMG Mori LASERTEC 50 Shape Femto is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-lasertec-50-shape-femto#price; the request is passed to DMG Mori or an authorised dealer.
3D laser ablation. DMG MORI names miniature molds, extrusion dies, inscriptions and engravings, plus complex prototypes and special processing. The machine has five axes, with B and C as the rotary axes, so the laser can be brought square to features on curved or inclined surfaces.
DMG MORI lists carbide, powder-metal steels, ceramics and other advanced materials, and describes the range as running from standard materials up to glass, ceramics and tungsten carbide. The process is contact-free, without electrodes and without tool wear.
DMG MORI states a positioning accuracy of ≤ 8 μm and surface qualities up to Ra < 0.1 µm in carbide tools. The surface figure is an upper result for one material, so ask for a sample in the material and geometry you intend to run.
The source has variable pulse length and burst modes. Those settings govern how much material each pulse removes and how much heat reaches the part, so they can be matched to the material and to whether the pass is for removal or for finish. DMG MORI's Highlights do not state the laser power, so ask for it.
The travels are 540 mm (21.3 in) in X, 500 mm (19.7 in) in Y and 700 mm (27.6 in) in Z, and DMG MORI gives the footprint as 4 m². The linear drives are rated at more than 1 g of acceleration. Setup is done with a CCD camera and a 3D measuring probe.
