The DMG MORI MULTISPRINT 36 is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 30i. a top spindle speed of 7,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI MULTISPRINT 36 multi-spindle lathe: 36 mm (1.4 in) bar, up to 28 tools with 24 driven, main spindles up to 7,500 rpm, Swiss-type kit.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 30i |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 7,500 RPM |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 28 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 50 mm (2 in) |
| Y-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 170 mm (6.7 in) |
| Max Workpiece Diameter | 36 mm (1.4 in) |
| Max Workpiece Length | 170 mm (6.7 in) |
| Max Bar Capacity | 36 mm (1.4 in) |
| Driven Tool Speed | Up to 13,800 rpm |
| CNC Control | FANUC 30i |
| Max Spindle Speed | Up to 7,500 rpm (main spindles, direct drive torque motor, water cooled) |
| Tool Capacity | Up to 28 tools, 24 of which can be driven |
| Driven Tool Torque | Up to 4.3 ft lb |
| Driven Tool Power | 1.2 hp (nominal) |
| Counter Spindles | Up to two counter spindles |
| Raw Part Diameter | Raw parts up to 2 in. |
Our best estimate for the DMG Mori MULTISPRINT 36 is $600,000 - $950,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-multisprint-36#price; the request is passed to DMG Mori or an authorised dealer.
Bar up to 36 mm (1.4 in), with a maximum workpiece length of 170 mm (6.7 in). DMG MORI also states that raw parts up to 2 in. can be machined without restrictions, using the 3-jaws chuck. Travels are 50 mm (2 in) in X, 100 mm (3.9 in) in Y and 170 mm (6.7 in) in Z.
Yes. DMG MORI describes chuck machining and a Swiss-type kit for long turning in one concept. The clamping can be changed between a collet for short workpieces, a guide bush for long workpieces and a 3-jaws chuck for raw part machining. A hydraulic cylinder is the standard solution and suits all clamping systems.
Up to 28 tools, 24 of which can be driven. They sit on modular radial slides, and a tool cartridge system with a modular gear box lets each position be configured. Driven tool spindles run at up to 13,800 rpm with up to 4.3 ft lb and 1.2 hp (nominal).
Up to 7,500 rpm. The main spindles are driven by water-cooled direct drive torque motors. DMG MORI's Highlights give no power or torque figure for them and do not state how many there are, so ask for both when requesting a quotation.
A FANUC 30i. The Highlights also list fast changeover between machine configurations, which matters on a machine that can be set up with collets, a guide bush or a 3-jaws chuck.
