The DMG MORI NEF 600 is an industrial-grade CNC Lathes & Turning Centers powered by the Siemens SINUMERIK 828D or FANUC 0i-TF. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG Mori NEF 600 lathe: 600 mm (23.6 in) swing, 1,500 mm turning length, 30 kW (40 hp) spindle with 1,900 Nm at up to 2,500 rpm, 400 mm chuck.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Siemens SINUMERIK 828D or FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing Diameter | 600 mm (23.6 in) |
| Max Turning Length | 1,500 mm (59.1 in) |
| Main Spindle Speed | 2,500 rpm |
| Main Spindle Power | 30 kW (40 hp) |
| Main Spindle Torque | 1,900 Nm |
| Chuck Size | 400 mm (15.7 in) |
| Turret Stations | 12 |
| Driven Tool Speed Optional | 4,000 rpm |
| Driven Tool Power Optional | 7.5 kW |
| Rapid Traverse X Z | 20 / 24 m/min |
| CNC Control | Siemens SINUMERIK 828D or FANUC 0i-TF |
| Machine Weight | Approx. 11,000 kg |
| Footprint L W | 5,200 × 2,100 mm |
| Spindle Bore | 90 mm |
Our best estimate for the DMG Mori NEF 600 is $165,000 – $250,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nef-600-lathe#price; the request is passed to DMG Mori or an authorised dealer.
No. It is not in the current lineup and is probably an older model, so it will be found as a used machine. Treat the listed figures as a guide and check the control, the driven tools and the chuck on the individual machine.
The listed main spindle has 30 kW (40 hp), 1,900 Nm and a top speed of 2,500 rpm, with a 90 mm spindle bore and a 400 mm (15.7 in) chuck. That is a high-torque, low-speed spindle for large diameters and long shafts.
Driven tools are listed as an option, at 4,000 rpm and 7.5 kW, on a turret with 12 stations. No Y-axis appears in the listed figures. On a used machine, check that the driven-tool option was fitted before planning any drilling or milling in the turning setup.
The listed control is a Siemens SINUMERIK 828D or a FANUC 0i-TF. Which one a machine carries has to be confirmed on that machine, because programs and operator training do not transfer directly between the two.
The listed footprint is 5,200 × 2,100 mm and the machine weight approximately 11,000 kg. The NEF 400 weighs 3,500 kg (7,716 lb) without chip conveyor, so the NEF 600 calls for a much more substantial floor and lifting plan.
