The DMG MORI NHX 10000 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NHX 10000 horizontal machining center: 1,700 x 1,400 x 1,510 mm travels, 2,000 mm workpiece diameter, 3,000 kg, up to 53.3 HP.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 53.3 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 2,000 mm (78.7 in) |
| Max Workpiece Height | 1,600 mm (63 in) |
| Max Workpiece Weight | 3,000 kg (6,613.9 lb) |
| X-Axis Travel | 1,700 mm (66.9 in) |
| Y-Axis Travel | 1,400 mm (55.1 in) |
| Z-Axis Travel | 1,510 mm (59.4 in) |
| Spindle Motor Power | up to 53.3 HP (standard spindle) |
| Spindle Torque | 1,042.2 ft-lbf at 10%ED (option) |
| Rapid Traverse | 1,968.5 ipm (X, Y and Z) |
| Cutting Feed Rate | 1,968.5 ipm (X, Y and Z) |
| Axis Acceleration | X 0.62 G / Y 0.51 G / Z 0.45 G (20.0 / 16.4 / 14.4 ft/s2) |
Our best estimate for the DMG Mori NHX 10000 is $800,000 - $1,200,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nhx-10000#price; the request is passed to DMG Mori or an authorised dealer.
The limits are 2,000 mm (78.7 in) in diameter, 1,600 mm (63 in) in height and 3,000 kg (6,613.9 lb). X travel is 1,700 mm (66.9 in) and Y travel 1,400 mm (55.1 in), both smaller than the envelope, so a part at the limits is machined over more than one table position.
The standard spindle is listed with an output of up to 53.3 HP. A maximum spindle torque of 1,042.2 ft-lbf is available as an option, with a 10%ED rating, so it is a short-duty figure. DMG MORI does not state the torque of the standard spindle or any spindle speed in the Highlights.
Rapid traverse is 1,968.5 ipm on X, Y and Z and the cutting feedrate is the same 1,968.5 ipm. Maximum acceleration is 0.62 G in X, 0.51 G in Y and 0.45 G in Z, or 20.0 / 16.4 / 14.4 ft/s2.
It is larger on all three axes. The NHX 10000 travels 1,700 mm (66.9 in) in X, 1,400 mm (55.1 in) in Y and 1,510 mm (59.4 in) in Z, while the NHX 8000 travels 1,400 mm (55.1 in), 1,200 mm (47.2 in) and 1,350 mm (53.1 in).
They are the two structural points DMG MORI lists under precision. A slide driven through its center of gravity is pushed without a tilting moment, and a box-in-box frame carries the moving unit between two supports instead of on one side. No accuracy figures are attached to either in the listed data.
