The DMG MORI NHX 4000 4th Generation is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NHX 4000 4th Generation: horizontal machining center, feed drive up to 70,000 mm/min, 1.2 g acceleration, 20,000 rpm spindle as standard.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Diameter | 630 mm (24.8 in) |
| Max Workpiece Height | 900 mm (35.4 in) |
| Max Workpiece Weight | 400 kg (881.8 lb) |
| X-Axis Travel | 560 mm (22 in) |
| Y-Axis Travel | 560 mm (22 in) |
| Z-Axis Travel | 660 mm (26 in) |
| Acceleration | Up to 1.2 g |
| Max Spindle Speed | 20,000 rpm (speedMASTER, standard) |
| Feed Rate Max | Up to 70,000 mm/min (feed drive) |
Our best estimate for the DMG Mori NHX 4000 4th Generation is $340,000 - $460,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nhx-4000-4th-generation#price; the request is passed to DMG Mori or an authorised dealer.
DMG MORI states a feed drive of up to 70,000 mm/min and acceleration of up to 1.2 g. Servo Sense for Workpiece on the Z and B axes optimizes the acceleration and deceleration of the table. Both figures carry an up-to qualifier, so treat them as ceilings and not as values for every axis.
It is stated to be compatible with pallet handling, tool handling and robot systems. The hydraulic / pneumatic interfaces needed for automated clamping are equipped as an option, and so is the tool visualizer for automated tool measurement. Specify both if the machine is going into an unattended cell.
Stainless steel covers are equipped as standard and DMG MORI names chip conveyor capacity for reliable chip evacuation. A ceiling shower coolant with a motor-driven nozzle is available as an option. No coolant pressure, tank volume or conveyor figure is stated in the Highlights.
A thick, high-rigidity bed with a 3 point support structure and stepped X-axis guideways. DMG MORI states that the base structure was optimized using analysis technology from the early design stage. The Highlights give no machine weight, so foundation and floor loading data must come from the installation documents.
The NHX 5000 4th Generation has 730 mm (28.7 in) of X and Y travel and 880 mm (34.6 in) of Z. Beyond it, the NHX 5500 has 800 mm (31.5 in) of X and Y, and the NHX 6300 has 1,050 mm (41.3 in) of X, 900 mm (35.4 in) of Y and 1,030 mm (40.6 in) of Z.
