The DMG MORI NLX 6000 Y is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NLX 6000 Y: 200 mm (7.9 in) Y travel, 920 mm max diameter, 2,000 mm part length, BMT turret with 86.3 ft lbf rotary tool torque.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 485 mm (19.1 in) |
| Y-Axis Travel | 200 mm (7.9 in) |
| Z-Axis Travel | 2,150 mm (84.6 in) |
| Max Workpiece Diameter | 920 mm (36.2 in) |
| Max Workpiece Length | 2,000 mm (78.7 in) |
| Max Bar Capacity | 116 mm (4.6 in) |
| Turret Type | BMT (Built-in Motor Turret) |
| Driven Tool Torque | Max. 86.3 ft lbf (10%ED) |
| Guideways | Slideways on X-, Z-, and Y-axis |
| Steady Rest | Steady rest quick change system (option) |
Our best estimate for the DMG Mori NLX 6000 Y is $450,000 - $700,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nlx-6000-y#price; the request is passed to DMG Mori or an authorised dealer.
200 mm (7.9 in). For comparison, the NLX 4000 and NLX 3000 have 120 mm (4.7 in) and the NLX 1500 has 100 mm (3.9 in). The other travels of the NLX 6000 Y are 485 mm (19.1 in) in X and 2,150 mm (84.6 in) in Z.
DMG MORI states a maximum rotary tool spindle torque of 86.3 ft lbf at 10%ED, delivered by a BMT (Built-in Motor Turret). It describes the milling capacity as rivaling machining centers with a No. 40 taper spindle. The 10%ED rating is intermittent, and a continuous torque is not published.
Not in the listed figures. Both are shown with 485 mm (19.1 in) of X, 200 mm (7.9 in) of Y and 2,150 mm (84.6 in) of Z, the same travels as the NLX 6000. Workpiece limits are also the same: 920 mm (36.2 in) in diameter and 2,000 mm (78.7 in) in length.
Yes. DMG MORI states that slideways are used on the X-, Z- and Y-axis, for higher vibration damping performance and dynamic rigidity, and calls them wide. Large-diameter ball screws are also listed. Milling off the centreline loads the Y-axis guideway sideways, which is where the damping of a sliding way helps.
Only up to 116 mm (4.6 in), the listed maximum bar capacity. That is a small fraction of the 920 mm (36.2 in) maximum workpiece diameter, so most parts will be loaded into the chuck individually.
