The DMG MORI NRX 2000 is an industrial-grade CNC Lathes & Turning Centers powered by the MAPPS - COMPACTline. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NRX 2000 two-spindle production lathe: parts to 180 mm (7.1 in) diameter and 100 mm long, 65.0 in wide without loader, 82.7 in high.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | MAPPS - COMPACTline |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 100 mm (3.9 in) |
| Z-Axis Travel | 220 mm (8.7 in) |
| Max Workpiece Diameter | 180 mm (7.1 in) |
| Max Workpiece Length | 100 mm (3.9 in) |
| CNC Control | MAPPS - COMPACTline |
| Machine Width | 65.0 in without loader |
| Machine Height | 82.7 in |
| Installation Volume | 501.5 ft3 including loader, workpiece stocker and rear left discharge type chip conveyor |
| Spindles | 2 (spindle 1 and spindle 2) |
| Operation Panel | 12.1-inch multi-touch operation panel |
Our best estimate for the DMG Mori NRX 2000 is $250,000 - $400,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nrx-2000#price; the request is passed to DMG Mori or an authorised dealer.
Workpieces up to 180 mm (7.1 in) in diameter and 100 mm (3.9 in) long. The axis travels are 100 mm (3.9 in) in X and 220 mm (8.7 in) in Z. Those limits point to short chucked parts such as discs, rings and hubs.
DMG MORI gives the machine width as 65.0 in without the loader and the machine height as 82.7 in. The volume of the full installation is given as 501.5 cu ft, a figure that includes the loader, the workpiece stocker and the rear-left-discharge chip conveyor.
It has two spindles, and DMG MORI describes it as running two machining processes at the same time with spindle 1 and spindle 2. The transfer equipment and loader move the part, so one machine does the work of two single-spindle lathes in unmanned operation.
DMG MORI lists its own operation system, MAPPS on COMPACTline, with a 12.1-inch multi-touch operation panel. No other control option appears in the published highlights for this model.
DMG MORI states that the low machine height, 82.7 in, allows loading into 20 ft dry containers. Confirm how the loader and workpiece stocker ship, because the 65.0 in machine width is given without the loader.
