The DMG MORI NVD 6000 DCG is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NVD 6000 DCG: die and mold machining center with 900 × 600 × 450 mm travels, 800 kg workpieces, ball screw cooling and direct scale feedback.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 1,000 mm (39.4 in) |
| Max Workpiece Width | 600 mm (23.6 in) |
| Max Workpiece Height | 450 mm (17.7 in) |
| Max Workpiece Weight | 800 kg (1,763.7 lb) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 450 mm (17.7 in) |
| Scale Feedback | Direct scale feedback |
| Ball Screw Cooling | Ball screw shaft cooling |
| Motor Bracket Cooling | Cooling of the motor bracket |
| Contour Control | AI contour control Ⅱ (standard) |
Our best estimate for the DMG Mori NVD 6000 DCG is $165,000 - $220,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nvd-6000-dcg#price; the request is passed to DMG Mori or an authorised dealer.
The maximum workpiece is 1,000 mm (39.4 in) long, 600 mm (23.6 in) wide and 450 mm (17.7 in) high, up to 800 kg (1,763.7 lb). Travels are 900 mm (35.4 in) in X, 600 mm (23.6 in) in Y and 450 mm (17.7 in) in Z. The weight limit will be reached before the dimensional limits on a solid steel part, so check the weight first.
DMG MORI lists cooling of the motor bracket, ball screw shaft cooling and direct scale feedback. The servo motors and ball screws are the heat sources closest to the axes, and cooling them limits how much the screws grow in a long cycle. Direct scale feedback then measures the slide position independently of the screw.
With 900 mm (35.4 in) of X travel and an 800 kg (1,763.7 lb) load, the moving masses are large, and any rocking at a reversal leaves a mark on a finished mold surface. DMG MORI states that DCG gives improved surface quality and roundness, acceleration and longer tool life. No figures accompany those statements.
The NVD 4000 DCG has 600 mm (23.6 in) of X travel and 400 mm (15.7 in) of Y and Z. The NVD 6000 DCG has 900 mm (35.4 in) of X, 600 mm (23.6 in) of Y and 450 mm (17.7 in) of Z, so the gain is mostly in table area and only slightly in height.
The NVX 5080 has 800 × 530 × 510 mm and the NVX 5100 has 1,050 × 530 × 510 mm of travel. The NVD 6000 DCG, at 900 × 600 × 450 mm, has more Y than either and less Z.
