The DMG MORI NVX 5060 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NVX 5060: 600 × 530 × 510 mm travels, 800 kg workpieces, slideways in X and Y, No. 40 speedMASTER or No. 50 powerMASTER spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | No. 40 taper (speedMASTER); No. 50 taper (powerMAS |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Length | 900 mm (35.4 in) |
| Max Workpiece Width | 600 mm (23.6 in) |
| Max Workpiece Height | 510 mm (20.1 in) |
| Max Workpiece Weight | 800 kg (1,763.7 lb) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 530 mm (20.9 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Spindle Taper | No. 40 taper (speedMASTER); No. 50 taper (powerMASTER) |
| Guideways | Slideways (X- / Y-axis); roller guides (Z-axis) |
| Through Spindle Coolant | Option (unit on coolant tank) |
| Chip Conveyor | Internal, spiral type (option) |
Our best estimate for the DMG Mori NVX 5060 is $155,000 - $210,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nvx-5060#price; the request is passed to DMG Mori or an authorised dealer.
A No. 40 taper speedMASTER spindle for high-speed machining, with improved spindle run-out accuracy, or a No. 50 taper powerMASTER spindle for heavy-duty cutting, with thermal expansion compensation by a spindle growth sensor. DMG MORI's Highlights give no speed, power or torque for either, so the figures have to be requested for the spindle you intend to buy.
Slideways on the X- and Y-axis and roller guides on the Z-axis. DMG MORI describes the X and Y slideways as extra wide, to minimize quadrant projection, and the Z roller guides as highly rigid. In practice the sliding axes carry the workpiece and absorb cutting vibration, and the rolling axis moves the spindle head with little friction.
Up to 900 mm (35.4 in) long, 600 mm (23.6 in) wide and 510 mm (20.1 in) high, and up to 800 kg (1,763.7 lb). Travels are 600 mm (23.6 in) in X, 530 mm (20.9 in) in Y and 510 mm (20.1 in) in Z, so a part at the maximum length and width overhangs the travel on both table axes.
No. The through-spindle coolant system, with its unit on the coolant tank, is listed as an option. So are the internal spiral-type chip conveyor and the coolant tank for collecting casting sludge. Decide on them with the order, since deep drilling and cast iron work both depend on them.
All three have 600 mm (23.6 in) of X travel and 510 mm (20.1 in) of Z. Y travel is 530 mm (20.9 in) on the NVX 5060, 560 mm (22 in) on the CMX 600 V and 600 mm (23.6 in) on the DMV 60.
