The DMG MORI NZX 2000 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX 2000: 65 mm (2.6 in) bar, workpieces to 320 mm diameter and 810 mm long, 210 x 110 x 810 mm travels, up to 16 tools per turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 210 mm (8.3 in) |
| Y-Axis Travel | 110 mm (4.3 in) |
| Z-Axis Travel | 810 mm (31.9 in) |
| Max Workpiece Diameter | 320 mm (12.6 in) |
| Max Workpiece Length | 810 mm (31.9 in) |
| Max Bar Capacity | 65 mm (2.6 in) |
| Driven Tool Speed | Up to 12,000 rpm (standard: 6,000 rpm) |
| Tool Capacity | Up to 16 tools on each turret |
| Rapid Traverse | X / Y / Z: 98.4 / 65.6 / 164.1 fpm |
| Scale Feedback | High-resolution direct scale feedback (option) |
Our best estimate for the DMG Mori NZX 2000 is $280,000 - $450,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nzx-2000#price; the request is passed to DMG Mori or an authorised dealer.
65 mm (2.6 in). The maximum workpiece diameter is 320 mm (12.6 in), so anything between the bar capacity and that limit is loaded as a chucked blank. Maximum workpiece length is 810 mm (31.9 in).
DMG MORI gives 98.4 fpm for the X-axis, 65.6 fpm for the Y-axis and 164.1 fpm for the Z-axis. Z is the fastest axis and also the longest at 810 mm (31.9 in), which is where most of the non-cutting travel on a shaft part takes place.
Not in axis travel. Both are listed with 210 mm (8.3 in) of X, 110 mm (4.3 in) of Y and 810 mm (31.9 in) of Z. The NZX 2000 is rated for workpieces up to 320 mm (12.6 in) in diameter with a 65 mm (2.6 in) bar capacity, and those are the limits to compare with the NZX 1500.
The turrets use BMT, which DMG MORI says enables milling at speeds of up to 12,000 rpm; the standard speed is 6,000 rpm. Up to 16 tools can be mounted on each turret. With 110 mm (4.3 in) of Y travel, flats, keyways and off-centre holes within that stroke can be machined without moving the part to a second machine.
No. DMG MORI lists high-resolution direct scale feedback as an option. If the work depends on holding diameters over long unattended runs, include it in the quotation and ask what feedback the base machine uses, which DMG MORI does not state.
