The DMG MORI NZX 4000 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI NZX 4000 long-bed lathe: parts to 660 mm (26 in) diameter and 3,000 mm long, 3,100 mm Z, 140 mm Y, spindle holes up to 11.2 in.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 385 mm (15.2 in) |
| Y-Axis Travel | 140 mm (5.5 in) |
| Z-Axis Travel | 3,100 mm (122 in) |
| Max Workpiece Diameter | 660 mm (26 in) |
| Max Workpiece Length | 3,000 mm (118.1 in) |
| Through Spindle Hole | A: φ 5.7 in.; B: φ 7.2 in.; C: φ 11.2 in. |
| Driven Tool Torque | Max. 86.2 ft./lbf. (10%ED) |
| Turret Type | BMT (Built-in Motor Turret) |
Our best estimate for the DMG Mori NZX 4000 is $400,000 - $650,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-nzx-4000#price; the request is passed to DMG Mori or an authorised dealer.
Three. DMG MORI lists variation A at 5.7 in, B at 7.2 in and C at 11.2 in. The bore is part of the machine configuration, so it has to be chosen when ordering, based on the largest pipe, tube or bar that must pass through the spindle.
Up to 3,000 mm (118.1 in), on a Z travel of 3,100 mm (122 in). The maximum workpiece diameter is 660 mm (26 in), X travel is 385 mm (15.2 in) and Y travel is 140 mm (5.5 in).
The turret is a BMT (Built-in Motor Turret) with a maximum rotary tool spindle torque that DMG MORI writes as 86.2 ft./lbf. at 10%ED. DMG MORI likens the milling capacity to a machining center with a No. 40 taper spindle. The rating is intermittent, and no continuous torque or rotary tool speed is published.
The NZX 4000 is far longer. It has 3,100 mm (122 in) of Z travel, while the NLX 4000 has 875 mm (34.4 in) on the Type 750 or 1,685 mm (66.3 in) on the Type 1500. X and Y are closer: 385 mm (15.2 in) and 140 mm (5.5 in) on the NZX 4000 against 365 mm (14.4 in) and 120 mm (4.7 in) on the NLX 4000.
