The DMG MORI SL-403 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI SL-403 turning center: 650 mm (25.6 in) diameter, 185 mm bar, Type 800 or Type 2000 beds, parts to 2,158 mm long, 944.9 ipm Z rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 345 mm (13.6 in) |
| Max Workpiece Diameter | 650 mm (25.6 in) |
| Max Bar Capacity | 185 mm (7.3 in) |
| Z-Axis Travel | 995 mm (39.2 in) [Type 800] / 2,000 mm (78.7 in) [Type 2000] |
| Max Workpiece Length | 958 mm (37.7 in) [Type 800] / 2,158 mm (85 in) [Type 2000] |
| Max Turning Diameter | 24.4 in. (B, C); 25.5 in. (BMC, CMC) |
| Rapid Traverse | X-axis: 787.4 ipm; Z-axis: 944.9 ipm |
| Turret Indexing Time | 0.4 sec. (1-station) |
| Tailstock Travel | 33.5 in. (800 type); 78.7 in. (2,000 type) |
| Oil Chiller | Standard equipment (C-type) |
The price estimate for the DMG Mori SL-403 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-sl-403#price; the request is passed to DMG Mori or an authorised dealer.
Bed length. Type 800 has 995 mm (39.2 in) of Z travel and a maximum workpiece length of 958 mm (37.7 in). Type 2000 has 2,000 mm (78.7 in) of Z travel and a maximum workpiece length of 2,158 mm (85 in). Tailstock travel is 33.5 in on the 800 type and 78.7 in on the 2,000 type. X travel is 345 mm (13.6 in) on both.
It depends on the version. DMG MORI gives 24.4 in for the B and C versions and 25.5 in for the BMC and CMC versions. The technical data table lists a maximum workpiece diameter of 650 mm (25.6 in) for the model.
Rapid traverse is 787.4 ipm on the X-axis and 944.9 ipm on the Z-axis. Turret indexing time is 0.4 sec for one station. On a long shaft with few tool changes the Z rapid matters most, since the turret travels the length of the part between cuts.
DMG MORI's table for the SL-403 lists X travel of 345 mm (13.6 in) and Z travel only. No Y travel is given. If off-centre milling is needed, the NLX 4000 is listed with 120 mm (4.7 in) of Y travel.
DMG MORI states that an oil chiller is included as standard equipment on the C-type. Nothing is stated for the other versions, so check the quotation if the machine being considered is not a C-type.
