The DMG MORI ULTRASONIC 55 MicroDrill is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Siemens SINUMERIK ONE. a top spindle speed of 32,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI ULTRASONIC 55 MicroDrill: listed with 0.1 mm minimum hole diameter, 32,000 min⁻¹ spindle, force control below 1 N, 550 × 550 × 510 mm travels.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Siemens SINUMERIK ONE |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 32,000 RPM |
| Spindle Taper Interface | Standard |
| Max Table Load Capacity | 600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 550 mm (21.7 in) |
| Y-Axis Travel | 550 mm (21.7 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | 32,000 min⁻¹ |
| Min Hole Diameter | 0.1 mm |
| Drilling Force Control | < 1 N |
| Max Workpiece Diameter | 500 mm (19.7 in) |
| Max Workpiece Height | 400 mm (15.7 in) |
| Max Table Load | 600 kg (1,323 lb) |
| Bed Weight | 2,400 kg monolithic |
| Internal Coolant | Up to 40 bar |
| CNC Control | Siemens SINUMERIK ONE |
| Ultrasonic | aluminum oxide, tungsten |
| Min Tool Diameter | ø 0.1 mm |
Our best estimate for the DMG Mori ULTRASONIC 55 MicroDrill is $450,000 - $650,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-ultrasonic-55-microdrill#price; the request is passed to DMG Mori or an authorised dealer.
The listed minimum hole diameter is 0.1 mm, and the minimum tool diameter is listed as ø 0.1 mm. The spindle is listed at 32,000 min⁻¹ and internal coolant at up to 40 bar. The hole depth that can be reached at that diameter is not among the listed figures and depends on the tool and the material.
The listed figure is drilling force control below 1 N. A drill of 0.1 mm has almost no strength of its own, so the feed has to react to very small changes in load, for example when chips pack in the flutes or the drill breaks through. Holding the force under 1 N is what keeps such a tool from snapping.
Listed limits are 500 mm (19.7 in) in diameter, 400 mm (15.7 in) in height and a table load of 600 kg (1,323 lb). Travels are listed as 550 mm (21.7 in) in X and Y and 510 mm (20.1 in) in Z, so the X and Y travels are slightly larger than the maximum workpiece diameter.
It is not in DMG MORI's current lineup and may be an older model. The listed figures on this page, including the Siemens SINUMERIK ONE control and the 2,400 kg monolithic bed, should be checked against the documentation and configuration of the specific machine.