The DMG MORI Wasino AA-1 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino AA-1: 2-spindle, 2-turret lathe for parts to 100 mm (3.9 in) diameter and 50 mm long, 5.0 μm cold-start thermal displacement.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 147.5 mm (5.8 in) |
| Y-Axis Travel | 50 mm (2 in) |
| Z-Axis Travel | 170 mm (6.7 in) |
| Max Workpiece Diameter | 100 mm (3.9 in) |
| Max Workpiece Length | 50 mm (2 in) |
| Configuration | 2-spindle and 2-turret (slide) |
| Thermal Displacement | 5.0 μm in a cold start |
| Ball Screw | Pre-tensioned ball screw |
| Automation | Loader Stocker System |
Our best estimate for the DMG Mori Wasino AA-1 is $200,000 - $320,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-wasino-aa-1#price; the request is passed to DMG Mori or an authorised dealer.
Up to 100 mm (3.9 in) in diameter and 50 mm (2 in) long. Travels are 147.5 mm (5.8 in) in X, 50 mm (2 in) in Y and 170 mm (6.7 in) in Z. The table gives no bar capacity, so the machine is set up for chucked blanks.
DMG MORI describes it as a 2-spindle and 2-turret (slide) machine for simultaneous turning. With two spindles cutting at once, output for each machine and each square metre of floor is higher than on a single-spindle lathe of the same part size. No floor space figure is given.
One: a thermal displacement of 5.0 μm in a cold start. The supporting features listed are a pre-tensioned ball screw, which reduces expansion caused by temperature rise, and stainless steel covers for stable machining accuracy. No circularity or positioning figure is published for this model.
Yes. A loader stocker system is listed to meet various production needs, along with peripheral equipment and applications. Because the parts are short chucked blanks of at most 100 mm (3.9 in) in diameter, automatic loading is the normal way to keep two spindles supplied.
