The DMG MORI Wasino G 100|300 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino G 100|300: flat tooling turning center, 300 mm X and 285 mm Z travel, parts to 285 mm diameter, 38 mm bar capacity.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 300 mm (11.8 in) |
| Z-Axis Travel | 285 mm (11.2 in) |
| Max Workpiece Diameter | 285 mm (11.2 in) |
| Max Workpiece Length | 280 mm (11 in) |
| Max Bar Capacity | 38 mm (1.5 in) |
| Bed Construction | Cast iron construction |
| Slideways | Induction-hardened horizontal slideways integrated on the bed |
Our best estimate for the DMG Mori Wasino G 100|300 is $200,000 - $320,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-wasino-g-100-300#price; the request is passed to DMG Mori or an authorised dealer.
DMG MORI lists a maximum workpiece diameter of 285 mm (11.2 in) and a maximum workpiece length of 280 mm (11 in). X travel is 300 mm (11.8 in) and Z travel is 285 mm (11.2 in), so a part at either limit uses almost the whole stroke. Plan the tool layout around the real part size before assuming the maximum is usable.
38 mm (1.5 in). That is far below the 285 mm (11.2 in) maximum workpiece diameter, so the machine splits into two kinds of work: small parts fed from bar, and larger chucked parts loaded one at a time.
DMG MORI describes a cast iron construction that is symmetrical with respect to the spindle center, on a rigid bed with a low center of gravity. The horizontal slideways are induction-hardened and integrated on the bed. A pre-tension structure is used to suppress thermal displacement.
No Y travel is listed. The technical data gives X travel of 300 mm (11.8 in) and Z travel of 285 mm (11.2 in) only. Within the Wasino range, the Wasino A-18S is listed with 100 mm (3.9 in) of Y alongside 180 mm (7.1 in) of X and 350 mm (13.8 in) of Z.
The X travels are close, 300 mm (11.8 in) against 310 mm (12.2 in) on the CTX 450. The CTX 450 adds 130 mm (5.1 in) of Y and has 825 mm (32.5 in) of Z, against 285 mm (11.2 in) here. The Wasino G 100|300 is the shorter machine for chucked and small bar work, the CTX 450 the one for longer parts.
