The DMG MORI Wasino jj 1 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
DMG MORI Wasino jj 1: two spindles and two turrets for front and rear faces in one process, parts to 100 mm (3.9 in), bar to 45 mm (1.8 in).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | DMG MORI (Germany / Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 147.5 mm (5.8 in) |
| Z-Axis Travel | 170 mm (6.7 in) |
| Max Workpiece Diameter | 100 mm (3.9 in) |
| Max Workpiece Length | 100 mm (3.9 in) |
| Max Bar Capacity | 45 mm (1.8 in) |
| Configuration | Two spindles and two turrets |
| Automation | Loader/stocker systems |
Our best estimate for the DMG Mori Wasino jj 1 is $200,000 - $320,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from DMG Mori; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dmg-mori-wasino-jj-1#price; the request is passed to DMG Mori or an authorised dealer.
Workpieces up to 100 mm (3.9 in) in diameter and 100 mm (3.9 in) long, and bar up to 45 mm (1.8 in). X travel is 147.5 mm (5.8 in) and Z travel is 170 mm (6.7 in). No Y travel is listed.
So that the front and rear faces of a part are machined in one process. DMG MORI states that this shortens the time needed to complete a part. In practice the second operation follows the first inside the machine, and the part comes out finished on both sides without being re-chucked by hand.
Yes. DMG MORI lists loader/stocker systems for a wide range of production needs and peripheral equipment for various manufacturing environments. With parts of at most 100 mm (3.9 in) in diameter and length, a loader keeps both spindles supplied on short cycles.
DMG MORI's table lists X travel of 147.5 mm (5.8 in) and Z travel of 170 mm (6.7 in) only, and no rotary tool figures are published for the model. If Y-axis work is required, the SPRINT 50 is listed with 70 mm (2.8 in) of Y travel and 235 mm (9.3 in) of Z.
