The Ermak Power-Bend Falcon 2100-60 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 500 x x mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 2100-60 press brake: 60 Ton, 2,100 mm bending length, 275 mm stroke, 530 mm daylight, motorized crowning, 5,085 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,085 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,100 mm (82.7 in) |
| Bending Power | 60 Ton (66 US tons) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Y Rapid Speed | 160 mm/s (6.3 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 165 mm/s (6.5 in/s) |
| Crowning | Motorized |
| X Axis Travel | 500 mm (19.7 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,015 mm (158.1 in) |
| Height | 2,580 mm (101.6 in) |
| Width | 1,870 mm (73.6 in) |
| Machine Weight | 5,085 kg (11,210 lb) |
The price estimate for the Ermak Power-Bend Falcon 2100-60 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/ermak-power-bend-falcon-2100-60#price; the request is passed to Ermak or an authorised dealer.
Bending length 2,100 mm, bending power 60 Ton, 1,700 mm between the columns, 275 mm stroke, 530 mm daylight and 410 mm throat depth. It weighs 5,085 kg.
The table gives 4,015 mm in length, 1,870 mm in width and 2,580 mm in height. Allow extra room at the rear for the backgauge and at the front for the sheet supports and the operator.
Ermak lists an X5 backgauge finger group as an option. It uses 5 servo motors and is quoted with a positioning accuracy of 0.05 mm. The standard unit is a two-axis X and R gauge.
It compensates for deflection of the beams under load so that the bend angle stays even along the part. Ermak describes it as CNC-controlled, with automatic deflection compensation.
