The Ermak Power-Bend Falcon 3100-100 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x x mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-100: 3,100 mm bending length, 100 Ton, 7.5 kW motor, 200 mm/s approach, 800 mm X travel, 6,786 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,786 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 100 Ton (110 US tons) |
| Distance Between Columns | 2,600 mm (102.4 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 9.5 mm/s (0.37 in/s) |
| Y Return Speed | 155 mm/s (6.1 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,970 mm (195.7 in) |
| Height | 2,550 mm (100.4 in) |
| Width | 2,480 mm (97.6 in) |
| Machine Weight | 6,786 kg (14,960 lb) |
The price estimate for the Ermak Power-Bend Falcon 3100-100 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/ermak-power-bend-falcon-3100-100#price; the request is passed to Ermak or an authorised dealer.
Yes, the bending length is 3,100 mm. The columns are 2,600 mm apart, so a part of full length cannot pass back between them and its flange depth is limited by the 410 mm throat.
The main motor is rated 7.5 kW and the hydraulic tank holds 150 L. A start-stop option stops the main motor after 2 minutes without upper beam movement.
Ermak's current table follows this model with the Power-Bend Falcon 3100-175, which weighs 9,086 kg and has a 15 kW motor and a 200 L tank. Its rapid approach is 180 mm/s.
A motorized two-axis gauge, X and R, with 2 finger blocks. X travels 800 mm at 500 mm/s and R travels 250 mm at 350 mm/s. Pneumatic rear supports are an option.
