The Ermak Power-Bend Falcon 4100-400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x x mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4100-400: 400 Ton, 4,100 mm, 510 mm throat, 375 mm stroke, 650 mm daylight, 30 kW motor, 26,100 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 26,100 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,100 mm (161.4 in) |
| Bending Power | 400 Ton (441 US tons) |
| Distance Between Columns | 3,550 mm (139.8 in) |
| Y Rapid Speed | 110 mm/s (4.33 in/s) |
| Y Working Speed | 8.4 mm/s (0.33 in/s) |
| Y Return Speed | 130 mm/s (5.12 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 1,000 mm (39.4 in) |
| Table Width | 240 mm (9.4 in) |
| Length | 6,250 mm (246.1 in) |
| Height | 3,500 mm (137.8 in) |
| Width | 2,700 mm (106.3 in) |
| Machine Weight | 26,100 kg (57,540 lb) |
The price estimate for the Ermak Power-Bend Falcon 4100-400 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/ermak-power-bend-falcon-4100-400#price; the request is passed to Ermak or an authorised dealer.
26,100 kg. It is 6,250 mm long, 2,700 mm wide and 3,500 mm high. Foundation, transport route and lifting gear should be settled before the order.
510 mm as standard on this size, where most Falcons have 410 mm. Special throat depths up to 1,500 mm are offered by Ermak as an option for wider bending.
Yes. The approach is 110 mm/s, the working speed 8.4 mm/s and the return 130 mm/s. On thick plate the forming time dominates, so the effect on output is smaller than the figures suggest.
3,550 mm (139.8 in). Longer plates, up to the 4,100 mm bending length, are bent in front of the side frames within the 510 mm throat.
