The Ermak Power-Bend Falcon 4270-260 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x x mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4270-260: 260 Ton, 4,270 mm bending length, 22 kW motor, 200 mm table width, 3,780 mm between columns, 18,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 18,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 260 Ton (287 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 140 mm/s (5.51 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 135 mm/s (5.31 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 22 kW (29.5 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 6,320 mm (248.8 in) |
| Height | 3,070 mm (120.9 in) |
| Width | 2,400 mm (94.5 in) |
| Machine Weight | 18,000 kg (39,683 lb) |
The price estimate for the Ermak Power-Bend Falcon 4270-260 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/ermak-power-bend-falcon-4270-260#price; the request is passed to Ermak or an authorised dealer.
18,000 kg. The machine is 6,320 mm long, 2,400 mm wide and 3,070 mm high, so both the floor and the access route need to be planned for a heavy, tall load.
The stroke is 275 mm inside 550 mm of daylight. Deep U sections are better served by the Power-Bend Falcon 4270-320, which has a 375 mm stroke and 650 mm of daylight.
A 22 kW motor and a hydraulic system holding 300 L of oil. Speeds are 140 mm/s in approach, 10 mm/s in the working stroke and 135 mm/s in return.
200 mm, at a height of 900 mm. A table of that width gives proper support to the wide V dies used for plate bending at this tonnage.
