The Ermak Power-Bend Falcon 6100-220 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x x mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 6100-220: 6,100 mm (20 ft) bending length, 220 Ton, 4 finger blocks, 4 sheet supports, 18.5 kW, 24,828 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 24,828 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 6,100 mm (240.2 in) |
| Bending Power | 220 Ton (243 US tons) |
| Distance Between Columns | 5,100 mm (200.8 in) |
| Y Rapid Speed | 130 mm/s (5.12 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 125 mm/s (4.92 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 4 |
| Sheet Supports | 4 |
| Oil Capacity | 300 L (79.3 US gal) |
| Motor Power | 18.5 kW (24.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 1,100 mm (43.3 in) |
| Table Width | 180 mm (7.1 in) |
| Length | 7,750 mm (305.1 in) |
| Height | 3,000 mm (118.1 in) |
| Width | 2,260 mm (89 in) |
| Machine Weight | 24,828 kg (54,735 lb) |
The price estimate for the Ermak Power-Bend Falcon 6100-220 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/ermak-power-bend-falcon-6100-220#price; the request is passed to Ermak or an authorised dealer.
The backgauge gets 4 finger blocks, the front gets 4 sheet supports, and the table sits at 1,100 mm. Stroke, daylight and throat stay at the standard 275 mm, 550 mm and 410 mm.
7,750 mm in length, 2,260 mm in width and 3,000 mm in height. In front of the machine there must also be room to bring a blank of up to 6,100 mm to the die.
It weighs 24,828 kg. Ermak does not comment on the figure, but beams spanning 5,100 mm between columns have to be much deeper than those of a short machine to limit deflection.
A bed of 6,100 mm with 4 finger blocks lends itself to two tool stations. Ermak's optional LED bar guiding system marks bending stations with coloured LED bars.
