The Feeler FDM-4232 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4200 x 3100 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-4232 mould machining center: 4,200 × 3,100 mm X/Y travel, 4,000 × 2,600 mm table, 21 (24) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 3,100 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 21 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Y Axis Travel | 3,100 (3,700) mm (122.0 (145.7) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 21 (24) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
The price estimate for the Feeler FDM-4232 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-fdm-4232#price; the request is passed to Feeler or an authorised dealer.
Y travel and load. The FDM-4232 lists 3,100 (3,700) mm of Y and 21 (24) ton. The FDM-4228 lists 2,700 (3,300) mm and 15 (21) ton. X travel, the 4,000 × 2,600 mm table, Z, spindle, rapids and magazine are the same.
Feeler does not explain it. Table width is 2,600 mm and Y travel 3,100 mm, so the spindle can travel past both table edges. On machines with changeable heads that room is typically used for side machining and for reaching a change station.
Yes. The FDM-4235 has a table 3,000 mm wide with 3,400 (4,000) mm of Y travel and a load row of 24 (27) ton, on the same 4,200 mm of X travel.
6,000 rpm as listed, with 4,000-8,000 rpm in brackets. The taper row reads BT/DIN/CAT 50(#40). Feeler says the enlarged spindle head and slide contact surfaces allow the use of larger diameter tools.
