The Feeler FDM-5228 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5200 x 2700 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-5228 mould machining center: 5,200 × 2,700 mm X/Y travel, 5,000 × 2,600 mm table, 18 (23) ton load, 15 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,200 mm |
| Y-Axis Travel | 2,700 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 18 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,200 mm (204.7 in) |
| Y Axis Travel | 2,700 (3,300) mm (106.3 (129.9) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 5,000 mm (196.9 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 18 (23) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
The price estimate for the Feeler FDM-5228 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-fdm-5228#price; the request is passed to Feeler or an authorised dealer.
X 5,200 mm (204.7 in), Y 2,700 mm (106.3 in) or the bracketed 3,300 mm (129.9 in), and Z 800 mm (31.5 in) or the bracketed 1,000-1,400 mm (39.4-55.1 in).
It depends on cutter size. The listed spindle is 6,000 rpm on a 50 taper, and the bracketed range is 4,000-8,000 rpm with #40. Large cutters on big surfaces are well served; small ball-nose tools in fine detail will run below their ideal speed.
18 ton as listed and 23 ton as the bracketed figure, on a table of 5,000 × 2,600 mm. The shorter FDM-4228 is listed at 15 (21) ton and the longer FDM-6228 at 21 (24) ton.
The series page does not say for this length. Feeler states only that for X-axis travel over 7200 mm a rack and pinion drive with reduction gearbox is used. At 5,200 mm the FDM-5228 is below that threshold, so ask which drive is fitted.
