The Feeler FDM-5232 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5200 x 3100 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-5232 mould machining center: 5,200 × 3,100 mm X/Y travel, 5,000 × 2,600 mm table, 23 (26) ton load, 15 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,200 mm |
| Y-Axis Travel | 3,100 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 23 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,200 mm (204.7 in) |
| Y Axis Travel | 3,100 (3,700) mm (122.0 (145.7) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 5,000 mm (196.9 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 23 (26) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
The price estimate for the Feeler FDM-5232 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-fdm-5232#price; the request is passed to Feeler or an authorised dealer.
X travel 5,200 mm (204.7 in), Y travel 3,100 mm (122.0 in), Z travel 800 mm (31.5 in), table 5,000 × 2,600 mm (196.9 × 102.4 in), load 23 ton, spindle 6,000 rpm on a 50 taper, 24 tools. Most rows also carry a bracketed alternative.
All three have 5,200 mm of X travel. The FDM-5228 lists 2,700 (3,300) mm of Y and 18 (23) ton; the FDM-5235 lists 3,400 (4,000) mm of Y, a 3,000 mm wide table and 26 (29) ton. The FDM-5232 sits between them.
X rapid is 15 m/min (591 ipm). The next length, the FDM-6232, is listed at 12 m/min (472 ipm), so this is the longest model of the 32 group at the higher rate.
Feeler describes table guideways in an optimized four-rail symmetrical layout for wide load-bearing surfaces, on a cast iron box-type base with reinforced ribs. The guideway type and size are not stated.
