The Feeler FTC-350LY is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. It offers working travels of 175 x 80 x 625 mm, a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-350LY Y-axis lathe: 8 in chuck, ø350 mm turning diameter, 585 mm turning length, 80 (±40) mm Y travel, 4,500 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 175 mm |
| Y-Axis Travel | 80 mm |
| Z-Axis Travel | 625 mm |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 8 in (203 mm) |
| Max Turning Diameter | ø350 mm (ø13.8 in) |
| Max Turning Length | 585 mm (23.0 in) |
| Bar Capacity | ø52 mm (ø2.0 in) |
| X Axis Travel | 175+25 mm (6.9+1.0 in) |
| Y Axis Travel | 80 (±40) mm (3.1 (±1.6) in) |
| Z Axis Travel | 625 mm (24.6 in) |
| Max Spindle Speed | 4,500 rpm |
| Spindle Nose | A2-6 |
| Spindle Bore | ø62 (ø76) mm (ø2.4 (ø3.0) in) |
| Tailstock Taper | MT-4 |
The price estimate for the Feeler FTC-350LY is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-ftc-350ly#price; the request is passed to Feeler or an authorised dealer.
80 (±40) mm, or 3.1 (±1.6) in: 40 mm above and below the spindle centreline. That is enough for keyways, flats and off-axis holes on parts of the size an 8 in chuck holds.
The FTC-350LY adds the Y axis and comes in one length, 585 mm of turning length. The FTC-350MC/LMC/XLMC has no Y travel, comes in three lengths up to 970 mm and is listed with a ø235 mm turning diameter against ø350 mm here.
Yes, as a separate column. The FTC-350SLY lists the same 80 (±40) mm Y travel with a second 6 in chuck and 660 mm of E-axis travel in place of the tailstock. The FTC-350LY itself has a tailstock with an MT-4 taper.
ø52 mm (ø2.0 in). The through-spindle hole is printed as ø62 (ø76) mm, but unlike the two-axis FTC-350/L/XL this column shows no second bar figure, so ask whether the larger bore raises bar capacity on this model.
