The Feeler FTC-350MC/LMC/XLMC is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. It offers working travels of 188 x x 350 mm, a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-350MC/LMC/XLMC turning-milling lathe: 8 in chuck, ø235 mm turning diameter, 310/600/970 mm turning length, 4,500 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 188 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 8 in (203 mm) |
| Max Turning Diameter | ø235 mm (ø9.3 in) |
| Max Turning Length | 310/600/970 mm (12.2/23.6/38.2 in) |
| Bar Capacity | ø52/ø66 mm (ø2.0/ø2.6 in) |
| X Axis Travel | 188+2 mm (7.4+0.1 in) |
| Z Axis Travel | 350/640/1,010 mm (13.8/25.2/39.8 in) |
| Max Spindle Speed | 4,500 rpm |
| Spindle Nose | A2-6 |
| Spindle Bore | ø62 (ø76) mm (ø2.4 (ø3.0) in) |
| Tailstock Taper | MT-4 |
The price estimate for the Feeler FTC-350MC/LMC/XLMC is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-ftc-350mc#price; the request is passed to Feeler or an authorised dealer.
The table gives ø235 mm (ø9.3 in) for this column and ø350 mm for the FTC-350/L/XL. Feeler does not explain the difference; the usual reason is that driven-tool holders project further from the turret and limit the swing. Check the tool interference drawing for the largest part planned.
Three. MC, LMC and XLMC list maximum turning lengths of 310/600/970 mm (12.2/23.6/38.2 in) and Z travels of 350/640/1,010 mm (13.8/25.2/39.8 in).
No. The Y-axis travel cell is empty for this column. Feeler lists a separate FTC-350LY with 80 (±40) mm of Y travel for milling off the spindle centreline.
An A2-6 nose, 4,500 rpm maximum, with the through-spindle hole printed as ø62 (ø76) mm and bar capacity as ø52/ø66 mm (ø2.0/ø2.6 in). Spindle power and torque are not in the table.
