The Feeler FTC-640L(MC) is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. It offers working travels of 320 x x 1500 mm, a top spindle speed of 2,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-640L(MC) long-bed CNC lathe: 15 in chuck, ø640 mm turning diameter, 1,500 mm Z travel, A2-11 geared spindle, 2,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 320 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,500 mm |
| Maximum Spindle Speed | 2,000 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 15 in (381 mm) |
| Max Turning Diameter | ø640 (520) mm (ø25.2 (20.5) in) |
| Max Turning Length | 808 (760) mm (31.8 (29.9) in) |
| Bar Capacity | ø117.5 mm (ø4.6 in) |
| X Axis Travel | 320+25 (260+15) mm (12.6+1.0 (10.2+0.6) in) |
| Z Axis Travel | 1,500 (1,240) mm (59.1 (48.8) in) |
| Max Spindle Speed | 2,000 rpm (ZF GEAR TRANSMISSION) |
| Spindle Nose | A2-11 |
| Spindle Bore | ø131 mm (ø5.2 in) |
| Tailstock Taper | MT-5 |
| Turret Stations | 12(12-VDI60) |
The price estimate for the Feeler FTC-640L(MC) is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-ftc-640l#price; the request is passed to Feeler or an authorised dealer.
The table is not consistent on this. Z travel is 1,500 mm (59.1 in), or 1,240 mm for the MC, but the maximum turning length cell prints 808 (760) mm, the same as the short-bed model. Confirm the distance between centres with Feeler.
Yes, by the table. Both columns list a 15 in chuck, an A2-11 nose, a ø131 mm through hole, ø117.5 mm bar capacity and 2,000 rpm with ZF gear transmission.
Turning diameter drops from ø640 mm to ø520 mm (ø20.5 in), X travel from 320+25 mm to 260+15 mm and Z travel from 1,500 mm to 1,240 mm (48.8 in). The turret for the MC is given as 12-VDI60.
The tailstock spindle has an MT-5 taper hole, one size above the MT-4 used on the FTC-550 and smaller models. Quill stroke, thrust and whether it is programmable are not stated in the series table.
