The Feeler SVW-2822 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 2800 x x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-2822 gantry machining center: 2,800 mm X travel, 2,600 × 1,800 mm table, 11 ton load, 15 m/min rapids, geared 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 11 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,600 mm (102.4 in) |
| Table Width | 1,800 mm (70.9 in) |
| Max Table Load | 11 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
The price estimate for the Feeler SVW-2822 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-svw-2822#price; the request is passed to Feeler or an authorised dealer.
1,800 mm (70.9 in), with a length of 2,600 mm (102.4 in). The Y travel and the distance between the columns are not listed on this page, so check the widest part against the maker's layout drawing.
Table width and load. The SVW-2817 has a 1,400 mm wide table rated at 9 ton. The SVW-2822 has an 1,800 mm wide table rated at 11 ton. X travel, table length, rapids, spindle and magazine rows are the same.
15 m/min (591 ipm), the same as Y and Z. The SVW-3222, the next length in this width, is listed at 12 m/min (472 ipm) on X.
A geared spindle at 6,000 rpm with a BT/DIN/CAT 50 taper. Feeler describes a fully geared internal transmission with a two-speed gearbox. The alternative shown in brackets is 8,000-15,000 rpm with #40.
