The Feeler SVW-4223 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4200 x x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-4223 gantry machining center: 4,200 mm X travel, 4,000 × 2,000 mm table, 15 ton load, geared 6,000 rpm spindle, 24-60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 15 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 15 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
The price estimate for the Feeler SVW-4223 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-svw-4223#price; the request is passed to Feeler or an authorised dealer.
The table is 4,000 mm by 2,000 mm (157.5 × 78.7 in) and carries up to 15 ton. X travel is 4,200 mm (165.4 in) and Z travel 800 mm, or 1,000 mm as the bracketed alternative. Y travel is not listed on this page.
Nothing in the rows shown here. Both columns give the same X travel, table, load, rapids, spindle and magazine. The model numbers differ, and the Y-axis travel of each should be confirmed with Feeler before choosing.
Feeler names an optional automatic attachment change system that reduces manual changeover time, improves productivity and minimizes machining errors. Which heads it changes is not stated on the series page.
6,000 rpm for the listed geared spindle with a BT/DIN/CAT 50 taper. The bracketed alternative is 8,000-15,000 rpm with #40, a lighter spindle for higher surface speeds.
