The Feeler VMP-65 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1650 x 800 x 800 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler VMP-65: 1,650 x 800 x 800 mm travels, 1,700 x 800 mm table rated 1,500 kg, 10,000 rpm No.40 spindle, 22 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,650 mm |
| Y-Axis Travel | 800 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Taper Interface | 7/24 taper No.40 |
| Table / Platter / Chuck Size | 1,700 x 800 mm (66.9 x 31.5 in) |
| Max Table Load Capacity | 1,500 kg |
| Automatic Tool Changer (ATC) | 22 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,650 mm (65.0 in) |
| Y Axis Travel | 800 mm (31.5 in) |
| Z Axis Travel | 800 mm (31.5 in) |
| Table Size | 1,700 x 800 mm (66.9 x 31.5 in) |
| Max Table Load | 1,500 kg (3,307 lb) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Taper | 7/24 taper No.40 |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Y | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| Tool Capacity | 22 |
The price estimate for the Feeler VMP-65 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/feeler-vmp-65#price; the request is passed to Feeler or an authorised dealer.
1,650 mm (65.0 in) in X, 800 mm (31.5 in) in Y and 800 mm (31.5 in) in Z. The table is 1,700 x 800 mm (66.9 x 31.5 in) with a maximum loading weight of 1,500 kg (3,307 lb).
Feeler's table does not list one. The column is headed VMP-65 (#40) and gives a 7/24 taper No.40 at 10,000 rpm, while the VMP-45 and VMP-50 columns are headed #40/50. Ask the maker if a No.50 spindle is needed on this frame.
The VMX-1650 has the same travels, table and 1,500 kg rating, with a spindle listed at 12,000 rpm and a magazine of 24 tools. The VMP-65 is listed at 10,000 rpm and 22 tools. Rapid rates are 36/36/24 m/min on both.
The series description says the VMP machines are equipped with hardened linear guides and use low-friction Turcite B wear pads to enhance cutting rigidity and surface finish. There is no guideway row in the spec table for individual models.
