The Haas Automation CM-1 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 30,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas CM-1 compact mill: 30,000 rpm ISO 20 spindle, 12 x 10 x 14 in (305 x 254 x 356 mm) travels, 20-tool carousel, 220 VAC single-phase power.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 30,000 RPM |
| Spindle Motor Rating | 5.0 kW |
| Spindle Taper Interface | ISO 20 |
| Table / Platter / Chuck Size | 22.5 × 10 in (572 × 254 mm) |
| Max Table Load Capacity | 150 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 12 in (305 mm) |
| Y-Axis Travel | 10 in (254 mm) |
| Z-Axis Travel | 14 in (356 mm) |
| Spindle Nose To Table Max | 16.6 in (422 mm) |
| Spindle Nose To Table Min | 2.6 in (66 mm) |
| Spindle Motor Power | 5 hp (3.7 kW) |
| Max Spindle Speed | 30,000 rpm |
| Spindle Torque | 8 ft-lbf @ 3,000 rpm (10.8 N·m @ 3,000 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | ISO 20 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Table Size | 22.5 × 10 in (572 × 254 mm) |
| T Slot Width | 0.438 in to 0.44 in (11.13 mm to 11.18 mm) |
| T Slot Center Distance | 3.38 in (86 mm) |
| T Slots | 3 |
| Max Table Load | 150 lb (68 kg) |
| Max Cutting Feedrate | 500 ipm (12.7 m/min) |
| Rapid Traverse | 757 ipm (19.2 m/min) |
| Max Thrust X | 1,149 lbf (5,111 N) |
| Max Thrust Y | 1,149 lbf (5,111 N) |
| Max Thrust Z | 1,149 lbf (5,111 N) |
| Tool Changer Type | Carousel |
| Tool Capacity | 20 |
| Max Tool Diameter | 2.3 in (58 mm) |
| Max Tool Weight | 5 lb (2.3 kg) |
| Tool To Tool | 3.2 s |
| Coolant Capacity | 13 gal (49 L) |
| Air Required | 1 scfm @ 100 psi (28 L/min @ 4.8 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 16 A |
| Electrical Low | 220 VAC 3-phase, 12 A |
| Shipping Domestic Pallet | 78 × 62 × 92 in (199 × 157 × 234 cm) |
| Shipping Export Pallet | 78 × 62 × 92 in (199 × 157 × 234 cm) |
| Machine Weight | 2,200 lb (998 kg) |
Haas Automation publishes a list price of US$77,995 for the Haas CM-1 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-cm-1#price; the request is passed to Haas Automation or an authorised dealer.
Small parts cut with small tools. The spindle runs to 30,000 rpm but is rated 5 hp (3.7 kW) and 8 ft-lbf (10.8 N·m) at 3,000 rpm, so it suits cutters that need speed more than torque. Travels of 12 × 10 × 14 in (305 × 254 × 356 mm) and a 150 lb (68 kg) table load set the upper limit on part size.
Yes. Haas lists 220 VAC single-phase at 16 A as well as 220 VAC three-phase at 12 A, and the table shows no higher-voltage supply for this model. Air demand is 1 scfm (28 L/min) at 100 psi, with a minimum supply pressure of 80 psi (5.5 bar), through a 3/8 in hose and coupler.
The CM-1 is smaller, lighter and much faster at the spindle. It has 12 × 10 × 14 in (305 × 254 × 356 mm) travels, a 30,000 rpm ISO 20 spindle with 5 hp (3.7 kW), and a 150 lb (68 kg) table load. The Mini Mill has 16 × 14 × 15 in (406 × 356 × 381 mm) travels, an 8,000 rpm 40-taper spindle with 10 hp (7.5 kW), and a 500 lb (227 kg) table load.
A 20-pocket carousel of ISO 20 holders. Each tool can be up to 2.3 in (58 mm) in diameter and 5 lb (2.3 kg), and a tool-to-tool change takes 3.2 s. The table gives no maximum tool length, so check long tools against the 2.6 in (66 mm) minimum and 16.6 in (422 mm) maximum distance from spindle nose to table.
The table is 22.5 × 10 in (572 × 254 mm) with three T-slots, 3.38 in (86 mm) apart, and it is rated for 150 lb (68 kg). Only 12 in (305 mm) of X and 10 in (254 mm) of Y can be reached by the spindle, so features outside that window need a second setup.
