The Haas Automation DC-2-40 Drill Center is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DC-2-40 Drill Center: CT40 spindle, 39.4 x 19.7 x 19.7 in (1,000 x 500 x 500 mm) travels, 20-tool turret, 1.5 s tool changes, 10,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT40 |
| Table / Platter / Chuck Size | 43.3 × 19.7 in (1,100 × 500 mm) |
| Max Table Load Capacity | 772 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 8,860 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 39.4 in (1,000 mm) |
| Y-Axis Travel | 19.7 in (500 mm) |
| Z-Axis Travel | 19.7 in (500 mm) |
| Spindle Nose To Table Max | 25.6 in (650 mm) |
| Spindle Nose To Table Min | 5.9 in (150 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 52 ft-lbf @ 3,000 rpm (70.5 N·m @ 3,000 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Liquid Cooled |
| Table Size | 43.3 × 19.7 in (1,100 × 500 mm) |
| T Slot Width | 0.63 in (16 mm) |
| T Slot Center Distance | 3.94 in (100 mm) |
| T Slots | 5 |
| Max Table Load | 772 lb (350 kg) |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 1,890 ipm (48 m/min) |
| Max Thrust X | 2,054 lbf (9,137 N) |
| Max Thrust Y | 2,054 lbf (9,137 N) |
| Max Thrust Z | 2,054 lbf (9,137 N) |
| Tool Changer Type | Turret |
| Tool Capacity | 20 |
| Max Tool Diameter | 4.3 in (110 mm) |
| Max Tool Diameter Adjacent Empty | 6.3 in (160 mm) |
| Max Tool Length | 7.9 in (200 mm) |
| Max Tool Weight | 11 lb (5 kg) |
| Tool To Tool | 1.5 s |
| Chip To Chip | 2.5 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 66 gal (250 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 123.8 × 90 × 101 in (314 × 229 × 257 cm) |
| Shipping Export Pallet | 123.8 × 90 × 101 in (314 × 229 × 257 cm) |
| Machine Weight | 8,860 lb (4,019 kg) |
Haas Automation publishes a list price of US$94,995 for the Haas DC-2-40 Drill Center (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-dc-2-40-drill-center#price; the request is passed to Haas Automation or an authorised dealer.
Z travel is 19.7 in (500 mm). The spindle nose is 5.9 in (150 mm) above the table at the bottom of the stroke and 25.6 in (650 mm) at the top. Maximum tool length is 7.9 in (200 mm), so with the longest tool loaded there is still clearance over a tall part or fixture when the head is fully raised.
Not quite. X and Y travel, the 43.3 × 19.7 in (1,100 × 500 mm) table and the 772 lb (350 kg) table load are the same. The DC-2 Drill Center has a BT30 spindle with 14 ft-lbf (19 N·m) at 2,500 rpm, 21 tools and 13 in (330 mm) of Z. The DC-2-40 has a CT40 spindle with 52 ft-lbf (70.5 N·m) at 3,000 rpm, 20 tools and 19.7 in (500 mm) of Z.
It is a 20-tool turret for CT40 holders. A tool can weigh up to 11 lb (5 kg) and be up to 7.9 in (200 mm) long. Diameter is limited to 4.3 in (110 mm) with all pockets full, or 6.3 in (160 mm) if the adjacent pockets are left empty, which reduces the number of tools the turret can carry.
772 lb (350 kg). The table is 43.3 × 19.7 in (1,100 × 500 mm) with five 0.63 in (16 mm) T-slots on 3.94 in (100 mm) centres. Add the weight of vises, plates and parts together; a long steel fixture plate takes a large share of that rating before any parts go on.
220 VAC three-phase at 40 A, or 440 VAC three-phase at 20 A. Air consumption is 4 scfm at 100 psi (113 L/min at 6.9 bar) and the supply must not fall below 80 psi (5.5 bar). The coolant tank holds 66 gal (250 L). The shipping pallet is 123.8 × 90 × 101 in (314 × 229 × 257 cm).
