The Haas Automation DC-3-40 Drill Center is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DC-3-40 Drill Center (no longer listed by Haas): 78.7 x 19.7 x 11.8 in (2,000 x 500 x 300 mm) travels, CT40 10,000 rpm spindle, 20 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT40 |
| Table / Platter / Chuck Size | 82.7 × 19.7 in (2,100 × 500 mm) |
| Max Table Load Capacity | 1,323 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 78.7 in (2,000 mm) |
| Y-Axis Travel | 19.7 in (500 mm) |
| Z-Axis Travel | 11.8 in (300 mm) |
| Spindle Nose To Table Max | 17.7 in (450 mm) |
| Spindle Nose To Table Min | 5.9 in (150 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| T Slot Width | 0.63 in (16 mm) |
| T Slot Center Distance | 3.94 in (100 mm) |
| T Slots | 5 |
| Max Cutting Feedrate | 1,100 ipm (27.9 m/min) |
| Rapid Traverse X | 1,200 ipm (30.5 m/min) |
| Rapid Traverse Y | 1,400 ipm (35.6 m/min) |
| Rapid Traverse Z | 1,400 ipm (35.6 m/min) |
| Max Thrust X | 9137 N (2054 lbf) |
| Max Thrust Y | 9137 N (2054 lbf) |
| Max Thrust Z | 9137 N (2054 lbf) |
| Tool Capacity | 20 |
| Max Tool Diameter | 4.3 in (110 mm) |
| Max Tool Diameter Large | 6.3 in (160 mm) |
| Max Tool Length | 7.9 in (200 mm) |
| Max Tool Weight | 11 lb (5 kg) |
| Tool To Tool | 1.5 s |
| Chip To Chip | 2.5 s |
| Tapping Max Tapping Speed | 5000 rpm |
| Coolant Capacity | 66 gal (250 L) |
| Air Required | 113.0 L/min @ 6.9 bar (4 scfm @ 100 psi) |
| Air Pressure Min | 5.5 bar (80 psi) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Spindle Taper | CT40 |
| Spindle Drive | Inline Direct-Drive |
| Table Size | 82.7 × 19.7 in (2,100 × 500 mm) |
| Spindle Torque | 52 ft-lbf @ 3,000 rpm (70.5 N·m @ 3,000 rpm) |
| Max Table Load | 1,323 lb (600 kg) |
| Tool Changer Type | Turret |
The price estimate for the Haas DC-3-40 Drill Center is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/haas-dc-3-40-drill-center#price; the request is passed to Haas Automation or an authorised dealer.
Haas has removed the DC-3-40 from its website, and the product page no longer loads. It is not in the current lineup. The specifications shown here were read from that page before it was removed, so they describe the model as it was last listed.
The listed travels are 78.7 in (2,000 mm) in X, 19.7 in (500 mm) in Y and 11.8 in (300 mm) in Z. The table is 82.7 × 19.7 in (2,100 × 500 mm) with five 0.63 in (16 mm) T-slots at 3.94 in (100 mm) spacing, and its listed load is 1,323 lb (600 kg).
A CT40 inline direct-drive spindle listed at 15 hp (11.2 kW), 10,000 rpm and 52 ft-lbf (70.5 N·m) at 3,000 rpm, with tapping to 5,000 rpm. The turret holds 20 tools up to 7.9 in (200 mm) long and 11 lb (5 kg). Tool diameter is listed as 4.3 in (110 mm), with 6.3 in (160 mm) given as the large-tool figure.
The listed supply is 220 VAC three-phase at 40 A or 440 VAC three-phase at 20 A. Air is listed at 4 scfm at 100 psi (113 L/min at 6.9 bar) with an 80 psi (5.5 bar) minimum. Coolant capacity is 66 gal (250 L). Check the nameplate of a used machine, since these are figures for the model.
