The Haas Automation DC-4-40 Drill Center is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DC-4-40 Drill Center (no longer listed by Haas): 98.4 in (2,500 mm) X travel, 102.4 in table, CT40 10,000 rpm spindle, 20-tool turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT40 |
| Table / Platter / Chuck Size | 102.4 × 19.7 in (2,600 × 500 mm) |
| Max Table Load Capacity | 1,323 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 15,400 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 98.4 in (2,500 mm) |
| Y-Axis Travel | 19.7 in (500 mm) |
| Z-Axis Travel | 11.8 in (300 mm) |
| Spindle Nose To Table Max | 17.7 in (450 mm) |
| Spindle Nose To Table Min | 5.9 in (150 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| T Slot Width | 0.63 in (16 mm) |
| T Slot Center Distance | 3.94 in (100 mm) |
| T Slots | 5 |
| Max Cutting Feedrate | 1,100 ipm (27.9 m/min) |
| Rapid Traverse X | 1,200 ipm (30.5 m/min) |
| Rapid Traverse Y | 1,400 ipm (35.6 m/min) |
| Rapid Traverse Z | 1,400 ipm (35.6 m/min) |
| Max Thrust X | 9137 N (2054 lbf) |
| Max Thrust Y | 9137 N (2054 lbf) |
| Max Thrust Z | 9137 N (2054 lbf) |
| Tool Capacity | 20 |
| Max Tool Diameter | 4.3 in (110 mm) |
| Max Tool Diameter Large | 6.3 in (160 mm) |
| Max Tool Length | 7.9 in (200 mm) |
| Max Tool Weight | 11 lb (5 kg) |
| Tool To Tool | 1.5 s |
| Chip To Chip | 2.5 s |
| Tapping Max Tapping Speed | 5000 rpm |
| Coolant Capacity | 150 gal (568 L) |
| Air Required | 113.0 L/min @ 6.9 bar (4 scfm @ 100 psi) |
| Air Pressure Min | 5.5 bar (80 psi) |
| Domestic Pallet For Coolant Tank Top Cover | 381 cm x 230 cm x 69 cm (150.0 in x 90.5 in x 27.0 in) |
| Weight Domestic Pallet Coolant Tank Top Cover | 608.0 kg (1,341 lb) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Spindle Taper | CT40 |
| Spindle Drive | Inline Direct-Drive |
| Table Size | 102.4 × 19.7 in (2,600 × 500 mm) |
| Spindle Torque | 52 ft-lbf @ 3,000 rpm (70.5 N·m @ 3,000 rpm) |
| Max Table Load | 1,323 lb (600 kg) |
| Tool Changer Type | Turret |
| Machine Weight | 15,400 lb (6,985.4 kg) |
The price estimate for the Haas DC-4-40 Drill Center is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/haas-dc-4-40-drill-center#price; the request is passed to Haas Automation or an authorised dealer.
The DC-4-40 has been removed from Haas's website and its product page no longer loads, so it is not in the current lineup. The specifications on this page were read from that product page before it was removed. Treat them as the last listed figures for the model.
Listed X travel is 98.4 in (2,500 mm) on a table 102.4 in (2,600 mm) long. The part also has to fit within 19.7 in (500 mm) of Y and under 11.8 in (300 mm) of Z stroke, with the spindle nose between 5.9 in (150 mm) and 17.7 in (450 mm) above the table. Listed table load is 1,323 lb (600 kg).
The listed machine weight is 15,400 lb (6,985.4 kg). The coolant tank top cover is listed separately on a 150.0 × 90.5 × 27.0 in (381 × 230 × 69 cm) pallet weighing 1,341 lb (608.0 kg). These are shipping figures for the model, so confirm the actual weight of a used machine before arranging a move.
Rapids are listed at 1,200 ipm (30.5 m/min) in X and 1,400 ipm (35.6 m/min) in Y and Z, with a maximum cutting feedrate of 1,100 ipm (27.9 m/min). Tool changes are listed at 1.5 s tool-to-tool and 2.5 s chip-to-chip from the 20-tool turret. Thrust is 2,054 lbf (9,137 N) on each axis and tapping speed goes up to 5,000 rpm.
