The Haas Automation DM-1 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DM-1: 40-taper drill/mill center, 20 x 16 x 15.5 in (508 x 406 x 394 mm) travels, 10,000 rpm, 18+1 tools, 2,400 ipm (61 m/min) rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 26 × 15 in (660 × 381 mm) |
| Max Table Load Capacity | 250 kg |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Approx. Machine Weight | 5,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 20 in (508 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 15.5 in (394 mm) |
| Spindle Nose To Table Max | 21.5 in (546 mm) |
| Spindle Nose To Table Min | 6 in (152 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 46 ft-lbf @ 1,700 rpm (62 N·m @ 1,700 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Table Size | 26 × 15 in (660 × 381 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 3 |
| Max Table Load | 250 lb (113.4 kg) |
| Max Table Load Evenly Dist | 500 lb (226.8 kg) |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 2,400 ipm (61 m/min) |
| Max Thrust X | 2,550 lbf (11,343 N) |
| Max Thrust Y | 2,550 lbf (11,343 N) |
| Max Thrust Z | 4,200 lbf (18,683 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 18+1 |
| Max Tool Diameter | 2.5 in (64 mm) |
| Max Tool Length | 7 in (178 mm) |
| Max Tool Weight | 12 lb (5.4 kg) |
| Tool To Tool | 1.75 s |
| Chip To Chip | 2 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 80 × 100 × 98 in (203 × 254 × 249 cm) |
| Shipping Export Pallet | 80 × 100 × 98 in (203 × 254 × 249 cm) |
| Machine Weight | 5,150 lb (2,336 kg) |
Haas Automation publishes a list price of US$77,995 for the Haas DM-1 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-dm-1#price; the request is passed to Haas Automation or an authorised dealer.
The spindle taper and the tool changer. The DM-1 has a CT40 or BT40 spindle and an 18+1 tool changer. The DT-1 has a BT30 spindle and holds 20+1 tools. Travels of 20 × 16 × 15.5 in (508 × 406 × 394 mm), the 26 × 15 in (660 × 381 mm) table, the 15 hp (11.2 kW) rating, 46 ft-lbf (62 N·m) of torque and 2,400 ipm (61 m/min) rapids are the same on both.
Haas lists two figures: a maximum table load of 250 lb (113.4 kg) and 500 lb (226.8 kg) for an evenly distributed load. The table is 26 × 15 in (660 × 381 mm) with three T-slots. If a job comes close to either figure, confirm with Haas which one applies to the way the load sits on the table.
The side-mount changer holds 18+1 tools on a CT40 or BT40 taper. Each can be up to 2.5 in (64 mm) in diameter, 7 in (178 mm) long and 12 lb (5.4 kg). With the spindle nose no lower than 6 in (152 mm) above the table, tool length and fixture height together decide whether a low part can be reached.
Rapids are 2,400 ipm (61 m/min) and the maximum cutting feedrate is 1,200 ipm (30.5 m/min). The spindle runs to 10,000 rpm and taps at up to 5,000 rpm. A tool change takes 1.75 s tool-to-tool and 2 s chip-to-chip.
Power is 220 VAC three-phase at 40 A or 440 VAC three-phase at 20 A. Air is 4 scfm at 100 psi (113 L/min at 6.9 bar), with an 80 psi (5.5 bar) minimum. The coolant tank holds 55 gal (208 L). Haas lists a shipping weight of 5,150 lb (2,336 kg) on an 80 × 100 × 98 in (203 × 254 × 249 cm) pallet.
