The Haas Automation DM-3 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DM-3: 36 x 16 x 15.5 in (914 x 406 x 394 mm) drill/mill center, CT40 or BT40 10,000 rpm spindle, 18+1 tools, 2,400 ipm (61 m/min) rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 38 × 15 in (965 × 381 mm) |
| Max Table Load Capacity | 250 kg |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Approx. Machine Weight | 5,860 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 36 in (914 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 15.5 in (394 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4.5 in (114 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 46 ft-lbf @ 1,700 rpm (62 N·m @ 1,700 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Table Size | 38 × 15 in (965 × 381 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 3 |
| Max Table Load | 250 lb (113.4 kg) |
| Max Table Load Evenly Dist | 400 lb (181.4 kg) |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 2,400 ipm (61 m/min) |
| Max Thrust X | 2,550 lbf (11,343 N) |
| Max Thrust Y | 2,550 lbf (11,343 N) |
| Max Thrust Z | 4,200 lbf (18,683 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 18+1 |
| Max Tool Diameter | 2.5 in (64 mm) |
| Max Tool Length | 7 in (178 mm) |
| Max Tool Weight | 12 lb (5.4 kg) |
| Tool To Tool | 1.75 s |
| Chip To Chip | 2 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 100 × 91.5 × 100 in (254 × 232 × 254 cm) |
| Shipping Export Pallet | 100 × 91.5 × 100 in (254 × 232 × 254 cm) |
| Machine Weight | 5,860 lb |
Haas Automation publishes a list price of US$86,995 for the Haas DM-3 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-dm-3#price; the request is passed to Haas Automation or an authorised dealer.
X travel is 36 in (914 mm) and the table is 38 × 15 in (965 × 381 mm), so a part close to the full table length can be machined in one setup as long as it stays within 16 in (406 mm) of Y. Z travel is 15.5 in (394 mm), with the spindle nose between 4.5 in (114 mm) and 20 in (508 mm) above the table.
Haas lists a maximum table load of 250 lb (113.4 kg) and an evenly distributed load of 400 lb (181.4 kg). On a table this long those limits are reached quickly with several vises, so add up workholding and parts before committing to a setup, and ask Haas which figure applies to a concentrated load.
The DC-2-40 is the bigger, heavier-duty choice: 39.4 × 19.7 × 19.7 in (1,000 × 500 × 500 mm) travels, a 772 lb (350 kg) table load and 52 ft-lbf (70.5 N·m) at 3,000 rpm. The DM-3 has 36 × 16 × 15.5 in (914 × 406 × 394 mm) travels and a 250 lb (113.4 kg) table load, but its rapids are 2,400 ipm (61 m/min) against 1,890 ipm (48 m/min) on the DC-2-40. Both spindles are rated 15 hp (11.2 kW) and 10,000 rpm.
The DT-3 has the same 36 × 16 × 15.5 in (914 × 406 × 394 mm) travels, the same 38 × 15 in (965 × 381 mm) table and the same 15 hp (11.2 kW), 46 ft-lbf (62 N·m) spindle rating, with a BT30 taper and 20+1 tools. The DM-3 uses CT40 or BT40 and holds 18+1 tools up to 12 lb (5.4 kg).
Haas lists 5,860 lb and a pallet of 100 × 91.5 × 100 in (254 × 232 × 254 cm). Power is 220 VAC three-phase at 40 A or 440 VAC at 20 A. Air is 4 scfm at 100 psi (113 L/min at 6.9 bar), 80 psi (5.5 bar) minimum, and the coolant tank holds 55 gal (208 L).
