The Haas Automation DT-2 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DT-2 drill/tap center: 28 x 16 x 15.5 in (711 x 406 x 394 mm) travels, 10,000 rpm BT30 spindle, 2,400 ipm rapids, 20+1 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | BT30 |
| Table / Platter / Chuck Size | 34 × 15 in (864 × 381 mm) |
| Max Table Load Capacity | 250 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 5,350 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 28 in (711 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 15.5 in (394 mm) |
| Spindle Nose To Table Max | 21.5 in (546 mm) |
| Spindle Nose To Table Min | 6 in (152 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 46 ft-lbf @ 1,700 rpm (62 N·m @ 1,700 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | BT30 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Table Size | 34 × 15 in (864 × 381 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 3 |
| Max Table Load | 250 lb (113.4 kg) |
| Max Table Load Evenly Dist | 500 lb (226.8 kg) |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 2,400 ipm (61 m/min) |
| Max Thrust X | 2,550 lbf (11,343 N) |
| Max Thrust Y | 2,550 lbf (11,343 N) |
| Max Thrust Z | 4,200 lbf (18,683 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 20+1 |
| Max Tool Diameter | 2 in (51 mm) |
| Max Tool Length | 7 in (178 mm) |
| Max Tool Weight | 5.5 lb (2.5 kg) |
| Tool To Tool | 1.75 s |
| Chip To Chip | 2 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 100 × 91 × 99 in (254 × 231 × 251 cm) |
| Shipping Export Pallet | 100 × 91 × 99 in (254 × 231 × 251 cm) |
| Machine Weight | 5,350 lb (2,427 kg) |
Haas Automation publishes a list price of US$70,995 for the Haas DT-2 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-dt-2#price; the request is passed to Haas Automation or an authorised dealer.
Only in X travel and table length. The DT-1 has 20 in (508 mm) of X and a 26 × 15 in (660 × 381 mm) table. The DT-2 has 28 in (711 mm) and a 34 × 15 in (864 × 381 mm) table. The DT-3 has 36 in (914 mm) and a 38 × 15 in (965 × 381 mm) table. All three have 16 in (406 mm) of Y, 15.5 in (394 mm) of Z, the 15 hp (11.2 kW) 10,000 rpm BT30 spindle and the 20+1 tool changer.
Spindle taper and tool count. The DM-2 has the same 28 × 16 × 15.5 in (711 × 406 × 394 mm) travels, 34 × 15 in (864 × 381 mm) table and 15 hp (11.2 kW), 10,000 rpm spindle rating, but takes CT or BT 40 tooling in an 18+1 changer. The DT-2 uses BT30 tooling in a 20+1 changer.
Haas lists a maximum tapping speed of 5,000 rpm. The spindle itself runs to 10,000 rpm and delivers 46 ft-lbf (62 N·m) at 1,700 rpm, so tap size is limited by torque and by the BT30 holder more than by speed. Tools can weigh up to 5.5 lb (2.5 kg).
Haas gives two figures: a maximum table load of 250 lb (113.4 kg) and 500 lb (226.8 kg) evenly distributed. The table measures 34 × 15 in (864 × 381 mm) with three T-slots on 4.92 in (125 mm) centers. Add up fixtures, vises and parts before planning a multi-vise setup or a rotary table.
Electrical supply is either 220 VAC three-phase at 40 A or 440 VAC three-phase at 20 A. Air consumption is 4 scfm at 100 psi (113 L/min at 6.9 bar), with a minimum supply pressure of 80 psi (5.5 bar) through a 3/8 in hose and coupler. The coolant tank holds 55 gal (208 L).
