The Haas Automation DT-3 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas DT-3: long-travel BT30 drill/tap center with 36 x 16 x 15.5 in (914 x 406 x 394 mm) travels, 10,000 rpm, 2,400 ipm rapids, 38 x 15 in table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | BT30 |
| Table / Platter / Chuck Size | 38 × 15 in (965 × 381 mm) |
| Max Table Load Capacity | 250 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 5,860 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 36 in (914 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 15.5 in (394 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4.5 in (114 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 46 ft-lbf @ 1,700 rpm (62 N·m @ 1,700 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | BT30 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Table Size | 38 × 15 in (965 × 381 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4.92 in (125 mm) |
| T Slots | 3 |
| Max Table Load | 250 lb (113.4 kg) |
| Max Table Load Evenly Dist | 400 lb (181.4 kg) |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 2,400 ipm (61 m/min) |
| Max Thrust X | 2,550 lbf (11,343 N) |
| Max Thrust Y | 2,550 lbf (11,343 N) |
| Max Thrust Z | 4,200 lbf (18,683 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 20+1 |
| Max Tool Diameter | 2 in (51 mm) |
| Max Tool Length | 7 in (178 mm) |
| Max Tool Weight | 5.5 lb (2.5 kg) |
| Tool To Tool | 1.75 s |
| Chip To Chip | 2 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 100 × 91.5 × 100.5 in (254 × 232 × 255 cm) |
| Machine Weight | 5,860 lb |
Haas Automation publishes a list price of US$75,995 for the Haas DT-3 (verified 2026-10-02). Options, tooling, freight and installation are extra, so a dealer quote will differ. A specific price can be requested at https://machinetoolindex.com/machines/haas-dt-3#price; the request is passed to Haas Automation or an authorised dealer.
In the headline figures, yes. The DT-2 has 28 in (711 mm) of X and a 34 × 15 in (864 × 381 mm) table; the DT-3 has 36 in (914 mm) and 38 × 15 in (965 × 381 mm). Y travel of 16 in (406 mm), Z travel of 15.5 in (394 mm), the 15 hp (11.2 kW) BT30 spindle, 2,400 ipm (61 m/min) rapids and the 20+1 changer are common to both.
They overlap in X but differ elsewhere. The DC-2 Drill Center has 39.4 × 19.7 × 13 in (1,000 × 500 × 330 mm) travels, a 43.3 × 19.7 in (1,100 × 500 mm) table rated for 772 lb (350 kg) and 1,890 ipm (48 m/min) rapids, with spindle torque of 14 ft-lbf (19 N·m) at 2,500 rpm. The DT-3 has less Y, 15.5 in (394 mm) of Z, faster 2,400 ipm (61 m/min) rapids and 46 ft-lbf (62 N·m) at 1,700 rpm.
BT30 holders, 20+1 of them. Each tool can measure up to 2 in (51 mm) in diameter and 7 in (178 mm) in length and weigh up to 5.5 lb (2.5 kg). A change takes 1.75 s tool-to-tool or 2 s chip-to-chip.
Haas lists 4.5 in (114 mm) as the minimum and 20 in (508 mm) as the maximum distance from spindle nose to table, with 15.5 in (394 mm) of Z travel between them. Part height, fixture height and tool length all have to fit inside that 20 in (508 mm), and tools can be up to 7 in (178 mm) long.
Three-phase power at 220 VAC and 40 A, or 440 VAC and 20 A. Compressed air at 4 scfm and 100 psi (113 L/min at 6.9 bar), never below 80 psi (5.5 bar). Haas gives a domestic shipping pallet of 100 × 91.5 × 100.5 in (254 × 232 × 255 cm) and a weight of 5,860 lb; these are shipping figures, not the installed floor space.
