The Haas Automation SR-4020P Sheet Router is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas SR-4020P Sheet Router, no longer listed by Haas: 168.9 x 86.4 in travel, 12.1 hp 24,000 rpm ISO30 spindle, 16-tool rack.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 12.1 kW |
| Spindle Taper Interface | ISO30 |
| Table / Platter / Chuck Size | 157.5 × 78.7 in (4,000 × 2,000 mm) |
| Max Table Load Capacity | 8,818 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 6,580 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 168.9 in (4,289 mm) |
| Y-Axis Travel | 86.4 in (2,195 mm) |
| Z-Axis Travel | 13.03 in (331 mm) |
| Spindle Nose To Table Max | 13.4 in (340 mm) |
| Spindle Nose To Table Min | 0.4 in (10 mm) |
| Spindle Motor Power | 12.1 hp (9 kW) |
| Max Spindle Speed | 24,000 rpm |
| Between Columns | 2084 mm (82.1 in) |
| Max Cutting Feedrate | 394 ipm (10 m/min) |
| Rapid Traverse X | 1,772 ipm (45 m/min) |
| Rapid Traverse Y | 1,772 ipm (45 m/min) |
| Rapid Traverse Z | 591 ipm (15 m/min) |
| Max Thrust X | 4004 N (900 lbf) |
| Max Thrust Y | 2002 N (450 lbf) |
| Max Thrust Z | 5406 N (1215 lbf) |
| Tool Capacity | 16 |
| Max Tool Diameter | 2 in (50 mm) |
| Max Tool Length | 4.5 in (114 mm) |
| Max Tool Weight | 22 lb (10 kg) |
| Air Required | 113.0 L/min @ 6.9 bar (4 scfm @ 100 psi) |
| Air Pressure Min | 5.5 bar (80 psi) |
| Electrical Low | 220 VAC 3-phase, 60 A |
| Electrical High | 440 VAC 3-phase, 30 A |
| Spindle Taper | ISO30 |
| Spindle Drive | Integral Spindle/Motor |
| Spindle Cooling | Liquid Cooled |
| Table Size | 157.5 × 78.7 in (4,000 × 2,000 mm) |
| Spindle Torque | 5.6 ft-lbf @ 10,000 rpm (7.6 N·m @ 10,000 rpm) |
| Max Table Load | 8,818 lb (4,000 kg) |
| Tool Changer Type | Linear Rack |
| Machine Weight | 6,580 lb (2,984.7 kg) |
The price estimate for the Haas SR-4020P Sheet Router is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/haas-sr-4020p-sheet-router#price; the request is passed to Haas Automation or an authorised dealer.
Haas no longer lists the SR-4020P; the model has been removed from the Haas website. The SR-4020, which has the same 8,818 lb (4,000 kg) table load, carries a 6.1 hp (4.5 kW), 18,000 rpm ER32 spindle and 315 ipm (8 m/min) rapids, with no tool changer among its listed figures.
On the listed figures, in spindle, speed, Z travel and tool handling. The SR-4020P has a 12.1 hp (9 kW), 24,000 rpm ISO30 spindle, a 16-tool linear rack, 1,772 ipm (45 m/min) X and Y rapids and 13.03 in (331 mm) of Z. The SR-4020 has 6.1 hp (4.5 kW), 18,000 rpm, an ER32 collet, 315 ipm (8 m/min) rapids and 6.76 in (172 mm) of Z. It also weighs less, 4,850 lb (2,200 kg) for the SR-4020 against 6,580 lb (2,984.7 kg).
The listed tool changer is a 16-tool linear rack on an ISO30 taper. Maximum tool size is 2 in (50 mm) in diameter, 4.5 in (114 mm) in length and 22 lb (10 kg). The SR-3015P, the smaller router with the same spindle figures, holds 12 tools.
Start with the services and the move. The listed supply is 220 VAC three-phase at 60 A or 440 VAC at 30 A, with 4 scfm of air at 100 psi (113 L/min at 6.9 bar) and a minimum pressure of 80 psi (5.5 bar). Listed weight is 6,580 lb (2,984.7 kg). Then confirm the machine in front of you matches the listed figures: a 24,000 rpm liquid-cooled spindle, a 16-tool rack, and 13.03 in (331 mm) of Z travel with 0.4 in (10 mm) to 13.4 in (340 mm) between spindle nose and table.